Philips Network Adaper owner manual Introduction, Remote Operation, Features

Net 1Card IB 2/15/00 12:17 PM Page 4

INTRODUCTION

The Net1Card is a network television systems control SmartCard that is designed to work with Philips SmartCard televisions in a balanced RF distribution sys- tem. The Net1Card allows an individual with a unit set in the Transmitting mode to control all televisions, up to 8 zones of televisions, or a single television, all set in the Receive mode. The controls include turning the sets on, setting the volume, and tuning to a specific channel for live or prerecorded messages or programs. Any Net1Card

REMOTE OPERATION

Listed below is a brief description of the TH374AH remote control. You need one remote control

(sold separately) to setup and operate the Net 1Card.

Only buttons important to Net1Card are described.

SLEEP - In the Consumer mode, press	RECALL - Press this button to
this button to select the amount of time	bring up the closed caption
you want before the TV turns off.	mode or to exit Net1Card
	menus.

can be set up to transmit or receive.

The Net1Card allows the individual with the Transmitter unit the option to lock out the Receiver units so that the power, volume, or channels cannot be changed until they are restored by the Transmitter unit. All of this is done in a matter of seconds by using an optional T374AH IR remote control device. (See page 5.) Other features

SELECT (M) - In the Consumer mode, press this button to bring up the on-screen menu options. Also may be used to advance the cursor.

SLEEP

-

SELECT

M

RECALL

+

CURSOR KEYS - Press these buttons (▲ ▼ ♣ ◀ ) to scroll or move through the on- screen menu or to adjust the picture in certain features.

A/CH - Press this

include the ability to change channels for different mes- sages, turn off all receiver televisions from a single loca- tion, send different messages or programs to different groups or individual sets. The Net1Card is easy to install, set up, and operate. The Net1Card also has the ability to poll an individual television to ensure correct systems operation.

The Net1Card also has composite video input, an S- Video input, two audio inputs, an RF input, a speaker jack and a cloning port for easy connectivity to a variety of media devices.

FEATURES

• Audio/Video Jacks for direct connections with VCRs
	(or other video accessories) for quality TV picture
	and sound playback.
•	Audio/Video Inputs.
•	Audio/S-Video Inputs.
• Ability to broadcast to an individual TV, to a group
	of TVs, or to all the TVs in the series.

MUTE - Press this button to turn the sound OFF on the TV. Press again to return the sound to its previous level.

VOL(ume) - Press this button to adjust the sound level of the TV.

A - Press the A but- ton to set a TV in the Net1Card Transmit, Receive, or Factory mode.

ENTER/RESET -

In the Consumer mode, press this button to reset TV settings to factory.

CC- Press this button to bring the Closed Captioning option to the screen.

		A/CH
VOL	MUTE		CH
A	B	C	D
	E	F	G
ENTER	1	2	3
P.PREF
	4	5	6
CC	7	8	9
CH GDE		0
POWER	TV	TV	DCM
	GUEST	SETUP	SETUP

button to toggle between the present and last viewed channels.

CH(annel) - Press this button to scroll through all available channels.

D & F - Press the the D button to select features under each specific Net1Card mode. Press the F button to display the version of Net 1Card installed.

NUMBERED BUTTONS - Press these buttons to directly access any available channel. (If a single digit channel is chosen, press 0 first. Example for chan-

• Ability to poll individual TVs.

• Clone port for limited applications.

4

POWER -	TV/GUEST - Press this button before
Press this	trying to setup the TV after installing
button to	the Net1Card. If the menus do not
turn the TV	come up when you press the A or D
ON or OFF.	button, press this button and try again.
	5

nel 6; first press 0, then 6.) In certain Net1Card menus, use these buttons to make selections.