Philips PDCC-JH-0811 Troubleshooting, Problem, Solution, No power, No picture, white picture

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

Problem	Solution
No power.	✔ Check if the AC power cord is properly
	connected.
	✔ Press STANDBY ONB on the DVD System or
	source buttons on the remote to turn on the
	power.
No picture.	✔ Check if the TV is switched on.
	✔ Check the video connection.
	✔ Press SOURCE on the DVD player repeatedly to
	select “DVD” or press DISC on the remote.
	✔ Set your TV to the correct Video In channel.This
	channel is usually near channel 00. Or, you may
	have a button on the TV remote control that
	selects Auxiliary or A/V IN channel. See your TV
	owner’s manual for details. Or, change channels at
	the TV until you see DVD screen on the TV.
	✔ If the progressive scan feature is activated but the
	connected TV does not support progressive
	signals or the cables are not connected
	accordingly, see “Getting Started-Setting up
	Progressive Scan feature (for Progressive Scan TV
	only)” for proper progressive scan setup or
	deactivate the progressive scan feature as below:
	1) Turn off your TV progressive scan mode or
	turn on to interlaced mode.
	2) Select “OFF” in PROGRESSIVE menu of
	system setup menu to turn off progressive, then
	press SYSTEM MENU to exit the menu.
Distorted or poor picture.	✔ Sometimes a small amount of picture distortion
	may appear.This is not a malfunction.
	✔ Clean the disc.
Completely distorted picture or black/	✔ TV has a colour system standard. If the disc’s or
white picture.	DVD system’s colour system is different than
	your TV’s colour system, the picture may be
	distorted or colourless.

English

37