Setting up
Screen size and throw distance
You can adjust the projection size with 2.0x zoom lens. Calculate and define the throw distance as follows.
Getting Started
|
|
|
|
|
Projected image | SH |
|
| S |
| D | |||
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
SW
Screen
|
| Projection size (4 : 3) |
|
|
| Throw distance (L) |
| ||
Screen diagonal | Screen height (SH) | Screen width (SW) | Minimum distance | Maximum distance | |||||
(SD) | (LW) | (LT) |
| ||||||
|
|
|
|
| |||||
33" | (0.84 m) | 0.50 m | (1'7") | 0.67 m | (2'2") |
|
| 1.9 m | (6'2") |
40" | (1.02 m) | 0.61 m | (2') | 0.81 m | (2'7") | 1.2 m | (3'11") | 2.4 m | (7'10") |
50" | (1.27 m) | 0.76 m | (2'5") | 1.02 m | (3'4") | 1.5 m | (4'11") | 3.0 m | (9'10") |
60" | (1.52 m) | 0.91 m | (2'11") | 1.22 m | (4') | 1.8 m | (5'10") | 3.6 m | (11'9") |
70" | (1.78 m) | 1.07 m | (3'06") | 1.42 m | (4'7") | 2.1 m | (6'10") | 4.2 m | (13'9") |
80" | (2.03 m) | 1.22 m | (4') | 1.63 m | (5'4") | 2.4 m | (7'10") | 4.8 m | (15'8") |
90" | (2.29 m) | 1.37 m | (4'5") | 1.83 m | (6') | 2.7 m | (8'10") | 5.4 m | (17'8") |
100" | (2.54 m) | 1.52 m | (4'11") | 2.03 m | (6'7") | 3.0 m | (9'10") | 6.0 m | (19'8") |
120" | (3.05 m) | 1.83 m | (6') | 2.44 m | (8') | 3.6 m | (11'9") | 7.2 m | (23'7") |
150" | (3.81 m) | 2.29 m | (7'6") | 3.05 m | (10') | 4.5 m | (14'9") | 9.0 m | (29'6") |
200" | (5.08 m) | 3.05 m | (10') | 4.06 m | (13'3") | 6.0 m | (19'8") | 12.1 m | (39'8") |
250" | (6.35 m) | 3.81 m | (12'6") | 5.08 m | (16'8") | 7.6 m | (24'11") | 15.1 m | (49'6") |
300" | (7.62 m) | 4.57 m | (14'11") | 6.10 m | (20') | 9.1 m | (29'10") | 18.1 m | (59'4") |
* All measurements above are approximate and may differ slightly from the actual measurements.
Calculation methods for screen dimensions
You can calculate more detailed screen dimension from the screen diagonal.
SW (m) = SD (") x 0.0203 | SH (m) = SD (") x 0.0152 |
LW (m) = 0.0304 x SD (") - 0.048 | LT (m) = 0.0606 x SD (") - 0.057 |
* The results above are approximate and may differ slightly from the actual measurements.
NOTE:
•See “Screen size and throw distance for 16:9 aspect ratio” on page 52.
•Do not use the projector at a raised or a horizontally tilted position as it may cause
malfunction of the projector.
•Make sure the projector lens surface is parallel with the screen. You can tilt the projector 
body approximately ± 30° vertically. Overtilting may result in shortening the component’s
life.
•For the best quality of the projection image, install a screen where sun light or room light does not shine directly onto the
screen. Close window shades or curtains to block the lights.
ENGLISH - 16
