OPTION menu
Remote control | Control panel |
See “Navigating through the MENU” on page 29. See “Main menu and
INPUT GUIDE
When you change the input method, the guidance appears in the upper right corner of the screen. The following display methods are available. Press I H to cycle through the options.
Options | Function | |
|
| |
OFF | Turn off the guidance. | |
| Display the input method by text. | |
SIMPLE | The INPUT GUIDE will go out after | |
| 5 seconds without any operation. | |
| Display the input method by graphic. | |
| The INPUT GUIDE will go out after | |
| 10 seconds without any operation. | |
DETAILED | If you select any COMPUTER | |
terminal which has no signal, the | ||
| ||
| computer connection guidance will | |
| be displayed. See “Computer | |
| connection guidance” on page 48. | |
|
|
1.Select USER and press ENTER.
2.Select the required line to enter or edit the original text, and press ENTER.
3.Use F G I H to specify the location of the required character and press ENTER.
The selected character will be displayed in the box. Select DELETE to delete the last entered character and press ENTER.
4.Repeat the step 3 until you finish the text to display in a line.
5.Select OK and press ENTER to set the entered text in a box.
Press G and edit the TEXT2 if you need to, and repeat the step 3 - 5.
COMPUTER2 SELECT
You can switch the function of the COMPUTER2 IN/ 1 OUT terminal.
INPUT | COMPUTER2 IN |
OUTPUT | COMPUTER1 OUT |
FILTER SETUP
You can change the pace of the ARF (Auto Rolling Filter) performance for the use environment. Press I H to select the required option.
1Ventilated with indoor air (e.g. small office room)
2Ventilated with outdoor air (e.g. large office room, class room)
3Public indoor space (e.g. restaurant, building lobby)
Settings
STARTUP LOGO
You can switch the logo on/off that is displayed when starting up the projector. Press I H to select the required option. STARTUP LOGO will be displayed for 30 seconds.
ON | Active |
OFF | Deactive |
USER | Display the original text |
Editing the original text
If you select USER, you can display the 2 lines of original text up to 40 characters in 1 line instead of the logo.
TEXT CHANGE
| DELETE |
OK | CANCEL |
NOTE:
•The ARF is a nonreusable product.
•Select the most suitable option for the use environment.
•If you select an unsuitable option, it may greatly affect on the duration of the projector life.
FILTER REMAINING
You can check the remaining amount of the ARF (Auto Rolling Filter). The colour of the bar scale is indicating the condition of the ARF.
Yellow | The filter remaining amount is getting |
| low. |
Red | No more remaining. |
NOTE:
•See “Replacing the ARF (Auto Rolling Filter)” on page 42.
•After you replace the ARF, FILTER REMAINING should be reset to “0” by pressing the ENTER button for
3 seconds.
ENGLISH - 36
