Care and Replacement
Resetting the FILTER |
|
|
|
|
REMAINING |
| FILTER REMAINING | ||
|
|
|
| |
| RESET A REMAIN OF A FILETER. |
| ||
1. Turn on the projector and display the FILTER |
|
| ||
|
|
|
| |
REMAINING in OPTION menu. Press the ENTER |
| OK | CANCEL |
|
button for 3 seconds and the confirmation screen |
|
| ||
will be displayed. |
|
| RETURN | |
2. Press I to select OK and press the ENTER |
|
| ||
| SELECT |
|
| |
button to reset FILTER REMAINING to “0”. See |
|
|
| |
|
| ENTER | ||
“FILTER REMAINING” on page 36. |
|
| ||
|
|
|
| |
Replacing the Lamp unit
Before replacing the Lamp unit
Switch off the MAIN POWER and disconnect the mains plug from the mains socket. Make sure the Lamp unit and the surroundings are cooled enough.
Prepare a
Contact an Authorised Service Centre to purchase a replacement Lamp unit
When the projector is mounted in the ceiling, do not work directly under the projector or put your face closer to the projector.
NOTE:
•Prior to replacing the lamp unit, allow it to cool down to prevent the risk of burns, damage and other hazards.
•Do not attempt replacement with an unauthorised lamp unit.
When to replace the Lamp unit
The Lamp unit is consumable and the brightness decreases by duration of usage. The LAMP indicator will inform you of the replacement timing at 2 800 hours, and at 3 000 hours, the projector will be turned off. Those figures are rough guidance and might be shortened by the usage conditions, characteristics of the Lamp unit, environmental conditions, and so on. You can check the duration of usage time using LAMP RUNTIME in the OPTION menu.
On screen | LAMP indicator |
Indication
REPLACE LAMP
Over 2 800 hours | “REPLACE LAMP” is displayed on the |
|
upper left of the screen for 30 seconds. |
| |
|
| |
|
|
|
| “REPLACE LAMP” is displayed on the | Illuminates RED. |
Over 3 000 hours | upper left of the screen, and it will stay until | |
you respond. |
| |
|
| |
| To clear the screen, press any button. |
|
NOTE:
•The guide times, 2 800 and 3 000 hours, are rough estimates based on certain conditions and is not a guaranteed time.
•For more information about the Lamp unit, such as guaranteed time, see the instructions which is provided with the Lamp unit.
Maintenance
ENGLISH - 43
