Philips PT-F100NTE Switching the input signal, Using the laser pointer, Remote control operation

Remote control operation

Switching the input signal

You can switch the input method manually by pressing the COMPUTER, NETWORK (PT-F100NTE only) and VIDEO buttons. Press the required button several times or I H to cycle through the input methods as follows. The actual projected image will be changed in a while.

The graphical guidance will be displayed on the upper right of the projected image and you can confirm the selected input method which is highlighted in yellow. See “INPUT GUIDE” on page 36.

Pressing the COMPUTER button

Pressing the NETWORK button

The NETWORK button is only for PT-F100NTE. See CD-ROMcontents for more detailed information.

Pressing the VIDEO button

VIDEO S-VIDEO

COMPONENT

Pressing the INPUT SELECT button on the projector

COMPUTER1 COMPUTER2

NOTE:

•Only when the COMPUTER2 SELECT is set to INPUT, you can switch between COMPUTER1 and COMPUTER2.

COMPUTER1	COMPUTER2
NETWORK		S-VIDEO
COMPONENT			VIDEO

NETWORK is only for PT-F100NTE.

Basic Operation

NOTE:

•If you select an unplugged input method, the guidance will blink on and off several times.

•See “List of compatible signals” on page 46.

•See “Connections” on page 20.

Using the laser pointer

You can highlight items on the screen with the red laser pointer while projecting the image in presentations or visual demonstrations as an eye-catching pointing device.

Hold down the LASER button to goes on the laser pointer and release to goes off.

NOTE:

•The laser pointer should never be projected directly into the eyes of a person or animal.

•Do not aim the laser at reflective surfaces.

•Do not allow children to use laser pointer.

•Never look directly into the laser beam.

•The laser pointer is not effective with translucent screens.

•Please read the cautions on the Remote control.

•This is a Class 2 laser product.

Deactivating the LASER button

You can deactivate the LASER button for an accidental operation.

1.Open the battery compartment cover of the Remote control.

2.Slide the switch tab.

3.Close the battery compartment cover of the Remote control.

See “Battery compartment” on page 13.

Top view	Deactivating switch
	On
	Off

Laser pointer beam emitter

Cautions

CAUTION: Use of controls of adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

ENGLISH - 26