Philips PT-FW100NTU manual Projection method, Front leg adjusters and throwing angle, Setting up

Setting up

Projection method

You can use the projector with any of the following 4 projection methods. To set the desired method in the projector, See “INSTALLATION” on page 35.

Setting on a desk/floor and projecting from front

Setting on a desk/floor and projecting from rear

INSTALLATION: FRONT/DESK

Mounting in the ceiling and projecting from front

INSTALLATION: REAR/DESK

Mounting in the ceiling and projecting from rear

Getting Started

INSTALLATION: FRONT/CEILINGINSTALLATION: REAR/CEILING

NOTE:

•A translucent screen is required for rear projection.

•When mounting the projector in the ceiling, the optional ceiling mount bracket (ET-PKF100H, ET-PKF100S) is required.

•See “Ceiling mount bracket safeguards” on page 42.

Front leg adjusters and throwing angle

You can screw up/down the front leg adjusters to control the angle of the projector for adjusting the throwing angle. See “Positioning the image” on page 22.

NOTE:

•Heated air comes out of the Air exhaust port. Do not touch the Air exhaust port directly.

•If keystone distortion occurs, see “KEYSTONE” on page 32.

•Screw up the adjuster legs, and an audible click will be heard as the limit.

ENGLISH - 15