Register your product and get support at | 2 | 3 | 4 |
www.philips.com/welcome |
|
|
|
QC5530 |
|
|
|
| 5 | 6 | 7 |
8 | 9 | 10 |
11 | 12 | 13 |
English
Introduction
Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/ welcome.
Your new Philips hair clipper with new ergonomic design and 180° adjustable cutting element allows you to clip your own hair easily.You can move the clipper over all areas of your head as easily as running your fingers through your hair.To enjoy using the hair clipper, we advise you to read the following information.
General description (Fig. 1)
1 | Cutting element |
2 | Swivel head |
3 | Length setting adjustment ring |
4 | On/off button |
5 | Charging light |
6 | Large comb attachment |
7 | Length setting indicator |
8 | Small comb attachment |
Compliance with standards
approved IEC safety regulations and can be safely cleaned under the tap (Fig. 2).
standards regarding electromagnetic fields
(EMF). If handled properly and according to the instructions in this user manual, the appliance
is safe to use based on scientific evidence
available today.
Before first use
14
1
17
20
23
4222.002.8255.3
1516
1819
2122
24 25
9 | Precision comb attachment |
10 | Adapter |
11 | Cleaning brush |
12 | Oil |
Important
Read this user manual carefully before you use the appliance and save it for future reference.
Danger
-- Make sure the adapter does not get wet.
Warning
Caution
1Lubricate the cutting element with 3 drops of the included oil (Fig. 3).
Charging
Charge the appliance for at least 1 hour before
you use it for the first time or after a long period
of disuse.
When the appliance is fully charged, it has a cordless clipping time of up to 1 hour.
When the charging light flashes orange, the battery
is running low (approx. 7 minutes of operating time left) and you need to recharge the appliance.
1Make sure the appliance is switched off.
2Insert the appliance plug into the appliance
and insert the adapter into the wall socket (Fig. 4).
,, The charging light starts to flash white to indicate that the appliance is charging (Fig. 5).
,, When the battery is fully charged, the charging light lights up white continuously.
,, After approx. 30 minutes the charging light goes out to save energy.
Corded clipping
1Switch off the appliance.
2Connect the appliance to the mains and wait a few seconds before you switch it on.
Note: If the battery is completely empty, wait a few minutes before you switch on the appliance.