![](/images/new-backgrounds/1215443/21544317x1.webp)
OPERATING YOUR REMOTE CONTROL
MCP Key (continued)
To Clear The MCP Key:
1. On the remote control,press and hold SET until the red light blinks twice, then release SET.
2. Enter
3. Press MCP once.
4. Press and hold SET until the red light blinks twice, then release SET.
FC1 And FC2 Keys
The FC1 and FC2 keys can be setup to per- form a number of functions with a single key press once the selection is programmed. Repetitive,
The FC keys are ideal for home theater oper- ations, setting a favorite channel, adding to multiple component uses, guide steps or other multiple functions you would like to control with one key press. On one key, you can define and program a sequence of events.
Moreover,each FC key can hold up to 15 key presses, allowing optimal individual cus- tomization. Below are a few examples to get you started.
Programming A Favorite Channel
With so many channels available through your cable system or satellite provider, a favorite channel can be programmed for easy, direct channel selection with one key press.
For example, let’s assume your favorite pro- grams are on channel 71. Use the following instructions to program the FC1 or FC2 key for this channel:
1. On the remote control, press and hold SET until the red light blinks twice,then release SET.
2. Enter
3. Press and release either FC1 or
FC2.
4. | On the remote con- |
| trol, press TV, VCR, |
| CBL, or DSS once. |
5. | Enter |
| NOTE: If you have access to over |
| 100 channels, enter in 071. |
6. | Press and hold SET until the red |
| light blinks twice, then release |
| SET. |
Programming A Secondary MCP Key With Instant Channel Selection
Just like the MCP key, the FC1 and FC2 keys can be programmed to turn on and off your equipment. For instance, let’s say you want your child to be able to easily turn on the equipment and select their favorite channel.
You can setup a sequence on the FC1 or FC2 key to turn on the TV and cable box, and then tune the cable box to a specific channel (e.g., 11) with the push of one key.
1. On the remote control,press and hold SET until the red light blinks twice, then release SET.
2. Enter
3. Press and release either FC1 or
FC2.
4. Enter the following sequence:
CBL,
POWER,
TV,
POWER,
CBL, and
5. Press and hold SET until the red light blinks twice, then release SET.
Now when you press the programmed FC key, the Cable box and TV will turn on and the Cable box will tune to channel 11.
9