Philips REM380 setup guide Programming The FC Keys See Page 9 For Further Instructions

QUICK FEATURES SETUP GUIDE (continued)

Device Re-Assignment (e.g., AUD Key Becomes Secondary VCR Key)

x 2

	x 2
Press SET	Enter 9-9-2;	Press component key	Press component key
until Red Light	the Red Light	to be moved once	to be reassigned once
blinks twice;	will blink twice.	(e.g.,VCR).	(e.g., AUD). Red Light will
release SET.			blink twice. Reassigned key is
			now ready for programming.

1 2 3 4

Programming The FC Keys (See Page 9 For Further Instructions)

x 2

	x 2
Press SET	Enter 9-9-5;
until Red Light	the Red Light
blinks twice;	will blink twice.
release SET.

* NOTE: If over 100 channels, enter 0-7-1.

or		x 2
Press FC1 or	Press component	Press SET
FC2 once.	key that controls	until Red Light
	channels once (e.g.,	blinks twice;
	CBL). Then enter	release SET.
	channel # (e.g. 7-1)*.

1 2 3 4 5

12