Connect and charge

Select Install Philips Device Manager from the Internet.

Follow the on-screen instructions to complete the installation of the Philips Device Manager from the Internet.

Right click on Philips GoGear SA065.

Select My Computer (WindowsXP®

Ensure that your computer is connected to the Internet.

Select My Computer (WindowsXP® / Windows2000®) / Computer (WindowsVista®).

Right click on Philips GoGear SA065. Select Install Philips Device Manager.

Follow the on-screen instructions to complete the installation of the Philips Device Manager.

3 From the pop-up window, select Install Philips Device Manager.

4 Follow the on-screen instructions to complete the installation of the Philips Device Manager.

If the pop-up window fails to appear on the

computer...

SA065 has a built-in battery that can be charged through the USB port of a computer (USB cable included).

1 Connect the USB plug of the supplied USB cable to a spare USB port on your computer.

2 Connect the small USB plug of the USB cable to the small USB jack on SA065.

3 Turn on your computer. »» SA065 charges.

System requirements:

• Windows® (2000, XP, Vista)

• Pentium III 800 MHz processor or higher

• 128 MB RAM

• 500 MB hard disk space

• Internet connection

• Microsoft® Internet Explorer 6.0 or later

• USB port

1 Connect the mini USB plug of the supplied cable to SA065.

2 Connect the standard USB plug of the supplied cable to your computer.

»» A pop-up window appears on the computer.

Cannot find the file on SA065?

/ Windows2000®) / Computer

Note

•• For first-time use, allow SA065 to charge for 3 hours.

•• The charging animation stops and the icon is displayed when the charging process is completed.

8EN

Philips SA65108, SA065104 user manual Connect and charge