Browse the CD contents with Windows Explorer.
Double click on the file that ends with ‘.exe’.
Insert the CD that comes with GoGear Vibe into the CD-ROM drive of your computer.
Connect GoGear Vibe to your computer.

Install software

GoGear Vibe comes with the following software:

Philips Device Manager (helps you get firmware updates for GoGear Vibe)

Media Converter for Philips (helps you convert and transfer video files for

GoGear Vibe)

Windows Media Player (helps you convert and transfer WMP media files for

GoGear Vibe)

Napster player (helps you convert and transfer Napster media files for GoGear

Vibe)

Important:

Remember to install the software provided in the supplied CD-ROM for music and/or video transfer.

Important: Before installing the software, check that your computer meets the requirements (see section System requirements in this user manual).

1

2

3 Follow the on-screen instructions to complete the installation of the software.

If the installation program fails to start automatically:

1

2

Connect and charge

GoGear Vibe has a built-in battery that can be charged through the USB port of a computer (USB cable included).

Note

•• For first-time use, allow GoGear Vibe to charge for 3 hours.

•• The charging animation stops and the icon is displayed when the charging process is completed.

Connect GoGear Vibe to a computer

1 Connect the USB plug of the supplied USB cable to a spare USB port on your computer.

2 Connect the small USB plug of the USB cable to the small USB jack on GoGear Vibe.

3 Turn on your computer. »» GoGear Vibe charges.

Battery level indication

The display indicates the approximate levels of the battery status as follows:

100% 75% 50% 25% 0%

»» A flashing battery screen indicates that the battery is low.The player saves

all settings and switches off within 60 seconds.

Note

•• Rechargeable batteries have a limited number

of charge cycles. Battery life and number of charge cycles vary by use and settings.

•• The charging animation stops and the

icon is displayed when the charging process is completed.

Tip

•• You can conserve battery power and increase the play time of the GoGear Vibe if you go to > [Display settings] > [Screen off timer] and ensure that the shortest timer setting is selected.

8EN

Page 9
Image 9
Philips SA1VBE16 Install software, Connect and charge, Connect GoGear Vibe to a computer, Battery level indication