3 Get started

Charge power

VIBE has a built-in battery that can be charged through the USB port of a computer.

As shown, connect the VIBE to a PC by using the USB cable.

Note

When you connect VIBE to a computer, you are briefly prompted to select: [Charge & transfer] or [Charge & play].

VIBE automatically applies [Charge & transfer], if no new selection is made.

Battery level indication

When the battery is low, the low battery screen is displayed repeatedly.

When the charging process is complete, is displayed.

Note

Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings.

To conserve battery power and increase the play time, do the following on VIBE:

(go to

> [Display settings] >

English

Set the backlight timer to a low value

 

[Backlight timer]).

Switch the player on or off

Press and hold / until the player is switched on or off.

Automatic standby and shut-down

The player has an automatic standby and shut- down feature that can save battery power. After 10 minutes in idle mode (no play, no button is pressed), the player switches off.

EN 9

Page 9
Image 9
Philips SA3VBE08, SA3VBE32 Get started, Charge power, Switch the player on or off, Automatic standby and shut-down