Philips SC-VK650 Using the Music Port, Operating a television, Changing the main unit and remote control mode, Using other equipment

Using other equipment

Using the Music Port

This feature enables you to enjoy music from a portable audio equipment.

	Portable audio
MUSIC PORT	equipment
MUSIC PORT	(not included)

jack

Audio cord (not included)

1 Plug the audio cord into the MUSIC PORT jack and press [TUNER/MUSIC P.] to select “MUSIC PORT”. Plug type: Φ3.5 mm stereo

2 Play the portable audio equipment. (See the portable audio equipment’s instruction manual.)

For recording: Press [¥, RECORD] on the main unit (recording starts). (l page 25)

Press [∫, STOP] to stop recording.

≥Sound from the speaker may be distorted if the portable audio equipment’s equalizer function (if any) is turned on. Turn it off before you plug into the MUSIC PORT jack.

Operating a television

Point the remote control at the television for the following operations.

Turning the television on/off

Press [TVÍ].

Switching the television’s video input mode Press [TV/AV].

Adjusting the volume

Press [i, j, TV VOL].

[Note]

Some models cannot be operated by this remote control.

Changing the main unit and remote control mode

The remote control and main unit are factory preset to “REMOTE 1” mode.

If your remote control affects other equipment during operation, you can switch to operate in “REMOTE 2” mode.

To switch to “REMOTE 2” mode

1While pressing and holding [MUSIC PORT] on the main unit

Press and hold [2] until “REMOTE 2” appears on the

main unit display.

2Press and hold [ENTER] and [2] for at least 2 seconds.

The main unit and remote control are now set to operate in “REMOTE 2” mode.

To return to “REMOTE 1” mode

Do step 1 and 2 above but use [1] instead of [2] for both steps.

(“REMOTE 1” appears on the main unit during step 1.)

The remote control cannot work with the main unit if their modes are different.

“REMOTE 1” or “REMOTE 2” appears on the main unit display when you operate the remote control.§

§If “REMOTE 1” appears (The main unit is in “REMOTE 1” mode.)

Press and hold [ENTER] and [1] on the remote control for at least 2 seconds.

If “REMOTE 2” appears (The main unit is in “REMOTE 2” mode.)

Press and hold [ENTER] and [2] on the remote control for at least 2 seconds.

[Note]

You can still operate a television using the remote control (l see left) even after switching the mode.

RQTV0141