Troubleshooting guide

34

Troubleshooting guide

Unit displays

 

Page
Although the unit is on standby

≥Turn off the demo function.

7

mode, the display lights up and

≥If you set the clock, demo function will be turned off automatically.

—

changes continuously.

 

 

 

 

 

The display is dark.

≥Press and hold [jDIMMER] to brighten the display.

9

“NO PLAY”

≥You inserted a disc the unit cannot play; insert one that can.

10

 

≥You inserted a blank disc.

—

 

 

 

“NO DISC”

≥You have not inserted a disc; insert one.

—

 

≥You have not inserted the disc correctly; insert it correctly.

11

“F61”

≥Check and correct the speaker cord connections.

5

 

If this does not fix the problem, there is a power supply problem. Consult the

 

 

dealer.

 

 

 

 

“DVD U11”

≥Disc is dirty. Wipe it clean.

11

“ERROR”

≥Incorrect operation performed. Read the instructions and try again.

—

 

 

 

“DVD H∑∑”

≥Trouble may have occurred. The number following “H” depends on the status

—

∑∑ stands for a number.

of the unit. Turn the unit off and then back to on. Alternatively, turn the unit off,

 

 

disconnect the AC power supply cord, and then reconnect it.

—

 

≥If the service numbers fail to clear, note the service number and contact a

 

qualified service person.

 

Television displays

 

 

 

 

 

“This disc may not be played in

≥You can only play DVD-Video if their region number is the same or includes the

Cover

your region.”

same region number as the unit or if the DVD-Video is marked “ALL”. Confirm

page

 

the region number for the unit on the back of the main unit.

 

 

 

 

 

No on-screen display.

≥Select “On” in “On-Screen Messages” in the “Display” tab.

23

“/”

≥The operation is prohibited by the unit or disc.

—

 

 

 

“Cannot display group xx,

≥You are trying to display incompatible contents.

—

content xx”

 

 

“Check the disc”

≥This disc may be dirty.

11

 

 

 

“Authorization Error”

≥You are trying to play the DivX VOD content that was purchased with a

31

 

different registration code. You cannot play the content on this unit. [DivX]

 

“Rental Expired”

≥The DivX VOD content has zero remaining plays. You cannot play it. [DivX]

31

“Rented Movie Expired”

 

 

 

 

 

Using the cassette deck

 

 

 

 

 

Poor quality sound.

≥Clean the heads.

11

Recording is not possible.

≥If the erasure prevention tabs have been removed, cover the holes with

25

 

adhesive tape.

 

 

 

 

Disc trays

 

 

 

 

 

Disc tray(s) cannot open.

≥Press [Í/I] to release the jammed tray(s) as the unit will switch off. Switch it on

11

“CHGR ERR” is displayed.

again and the tray(s) will initialise to the previous tray(s) condition.

—

 

≥If this still does not fix the problem, please consult the dealer.

 

 

 

Memory reset (Initialisation)

When the following situations occur, refer to the instructions below to reset the memory: ≥There is no response when buttons are pressed.

≥You want to clear and reset the memory contents.

To reset memory

1 Disconnect the AC power supply cord. (Wait at least 3 minutes before proceeding to step 2.)

2 While pressing and holding down [Í/I] on the main unit, reconnect the AC power supply cord. “sssssssss” appears on the display.

3 Release [Í/I].

All the settings are returned to the factory preset.

You will need to reset the memory items.

RQTV0141