Philips SC2001/01 user manual Possible cause Solution Problem

		English 25
	Possible cause	Solution
Problem
I have switched on the	The appliance has	To reset the appliance, switch off the appliance and
appliance but I cannot	to be reset.	then switch it on again. If you still cannot adjust the
increase or decrease the		light intensity, contact the Consumer Care Centre in
light intensity.		your country, your Philips dealer or a Philips service
		centre.
The ‘ready to flash’ light	You have not put	Place the appliance in a 90° angle onto the skin in such
does not go on when I	the attachment	a way that all contact switches touch the skin.Then
place the appliance on	with safety ring	check if the ‘ready to flash’ light is on and press the
the skin.	properly on the	flash button.
	skin.
		If this does not work, place the appliance on a part
		of your body where it is easy to establish full skin
		contact, for example on your lower arm.Then check
		if the ‘ready to flash’ light works. If the ‘ready to flash’
		light still does not go on when you place the appliance
		on the skin, contact the Consumer Care Centre in
		your country, your Philips dealer or a Philips service
		centre.
	The safety ring is	Clean the safety ring carefully. If you are unable to clean
	dirty.	the safety ring properly, contact the Consumer Care
		Centre in your country, your Philips dealer or a Philips
		service centre to replace the attachment.
The ‘ready to flash’ light	The overheat	When the overheat protection has been activated,
does not go on when I	protection has	the fan still works. Do not switch off the appliance
place the attachment on	been activated.	and let it cool down for approx. 15 minutes before
my skin, but the cooling		you continue to use it. If the ‘ready to flash’ light still
fan works.		does not go on when you place the appliance on
		the skin, contact the Consumer Care Centre in your
		country, your Philips dealer or a Philips service centre.
The ‘ready to flash’ light is	The appliance	To reset the appliance, switch off the appliance and
green but the appliance	needs to be reset.	switch it on again. If the ‘ready to flash’ light is green
does not produce a flash		but the appliance still does not produce a flash when
when I press the flash		you press the flash button, contact the Consumer Care
button.		Centre in your country, your Philips dealer or a Philips
		service centre.
The appliance becomes	This is normal.	No action required.
warm during use.
The appliance does not	The appliance	To reset the appliance, switch it off and on again. If the
show light intensity 1	needs to be reset.	appliance still does not show light intensity 1, contact
when I switch it on.		your Customer Care Centre, your Philips dealer or a
		Philips Service Centre.
The appliance produces a	The attachment	Clean the attachment carefully. If you are unable to
strange smell.	and/or the filter	clean the attachment properly, contact the Consumer
	glass is dirty.	Care Centre in your country, your Philips dealer or a
		Philips service centre to replace the attachment.