AC H
BA
CN N
DE L
ENGLISH 11
Avoiding interference
•If there is interference or if sound reception is poor, switch both units to another channel.
•Always ensure that the CHANNEL selection switches (2 and 30) on both units are set to the same position.
Monitoring baby silently
•Adjust the volume on the Parent Unit to the lowest level using the VOLUME ON/OFF control (29) (do not switch off).
>Now you will not hear your baby.Therefore you should continuously check the sound level lights (26).The sound level lights will visually alert you to baby’s sounds.The more noise your baby makes, the more lights light up.
Checking that the units are in contact
•Check that the digital SYSTEM CHECK light (24) on the Parent Unit lights up continuously (green) to confirm that the connection between both units is reliable.
•If the light flashes (green), move the Parent Unit closer to the Baby Unit.
>The light flashes if the units are out of range for more than 30 seconds or if there is interference.
Switching on the system check alarm
The system check alarm on the Parent Unit beeps when the units are not in contact.The Parent Unit is delivered with the system check alarm in the Off ( 
) position.To switch on the alarm:
1 Open the Parent Unit’s battery compartment cover (32).
2 Set the SYSTEM CHECK ALARM switch (31) inside the compartment to the ON position ( 
).
3 Close the battery compartment cover (32).
>The SYSTEM CHECK light (24) can still flash even if the system check alarm is switched off.
Switching on the night light
•Press the 
button (4) to switch on the nightlight.
•Switch off the night light when operating the Baby Unit on batteries to conserve power.
Operating range 200m in open air
The baby monitor has an operating range of up to 200 metres in ideal
