Philips SC469 manual English

ENGLISH 9

3 Connect the AC power adapter (21) to the DC 9V —<±socket (20) of the Baby Unit and insert the mains plug into the mains supply.

4 Use the TONE/PULSE selector (15) to select tone dialling or pulse dialling.

Always use tone dialling unless your telephone company only supports pulse dialling. Please check with your telephone company when in doubt.

5 Press the POWER button (7).

>The display (9) lights up and the Power light (8) lights up green.

>After a few seconds ‘M1’ starts blinking on the display.

The Baby Unit is now in Quick install mode and you are asked to enter:

–A call-up phone number (M1).This is the number the Baby Unit is going to call when sound is detected.

–A 4 digit PIN code (PIN).The PIN code has to be entered when placing calls to the Baby Unit.

–A sensitivity time ( ).This is the time after which the Baby Unit calls the call up number when sound is detected.

The default is 10 seconds.

6 Enter the call-up phone number, PIN code and sensitivity time using the numeric keypad (5) and confirm each entry by pressing the OK button on the keypad (5).

>The Baby Unit is now ready for use in Dial-up mode and returns to regular baby monitor mode.

Notes:

–Optional conversion connectors are available at your telephone supplier, in case your telephone cable does not fit.

–With the C(lear) button on the keypad (5) you can always clear the last entered digit.

–If you do not wish to change the default sensitivity time ( ), simply press the OK button on the keypad (5).

–If no button is pressed for 5 seconds the Baby Unit enters regular baby monitor mode.

–To undo the installation, press the RESET button (13) for more than

5 seconds.

–For more detailed information on programming and on resetting the Baby Unit, see ‘Advanced settings’.