Philips SC469 manual Resetting the Baby Unit

Setting the sensitivity time

When the Baby Unit detects sound for approximately 10 seconds, it will dial the selected number. In case you want to delay calling out interval you can enter another ‘sensitivity time’.

1 Press the PRG (Program) button on the keypad (5).

2 Press the button on the keypad (5).

> ’ ’ and ‘10’ start flashing on the display.

3 Use the numeric keypad (5) to enter the required sensitivity time time and confirm by pressing the OK button on the keypad (5).

ENGLISH 15

Notes:

–With the C(lear) button on the keypad (5) you can always clear the last entered digit.

–If you wish to change the PIN code, just repeat the above procedure.

Notes:

–With the C(lear) button on the keypad (5) you can clear the last entered digit.

–Entering a time under 10 seconds or over 360 seconds will not be accepted.

Resetting the Baby Unit

Resetting the Baby Unit is an easy way to delete all programmed phone numbers, the PIN code and the sensitivity time simultaneously. Resetting will also restart the quick start installation process.

•Keep the RESET button (13) pressed for about 5 seconds.

>First you will hear a short confirmation beep.

>When you hear a double beep, the reset procedure is complete. All user settings (including selected language) are now reset to the default factory settings.