Philips SHC8585/00 No sound, distorted sound, BUTTON. The POWER ON/OFF, your hearing, English

			ENGLISH 9
		Wrong headphone orientation	Reposition the headphone with
		when placed onto the charging	correct orientation.
		dock
	No sound/	Headphone power off	Push the POWER ON/OFF
distorted sound			BUTTON. The POWER ON/OFF
			INDICATOR light turns on automatically
			indicating the headphone is on.
		No battery installed	Follow step 1 to 4 of
			‘Installing/replacing the batteries’
		Wrong battery orientation	Reposition the batteries according to
			the engraved polarity symbol.
		No power supply to transmitter	Make sure the docking station is
			connected to the local mains power
			supply through an adapter and follow
			step 5 to 7.
		Battery power running low	Follow steps 5 to 7 to recharge the
			system.
		Audio source not connected	Make sure the audio output of your
			audio source is connected to the
			3.5 mm STEREO INPUT JACK of
			your transmitter. Follow step 9 to 12.
		Audio source is off	Turn on your audio source.
		Volume level set too low	Adjust the volume level of your
			audio source or the headphone.
			Hearing Safety: Continuous use at a
			high volume may permanently damage
			your hearing.
		Audio output level low	In case of audio sources with
			adjustable output level, adjust the
			output level to a higher and
			non-distorted level.
			IMPORTANT: In case of certain TVs,
			the headphone jack output level can
			only be adjusted after accessing the TV
			on-screen menu.
		Headphone not tuned to	Push and hold the AUTO-TUNING
		the transmitter	BUTTON for about 1 sec, then the
			headphone will automatically search
			for the best possible reception.
		Interference from other	1) Alter the transmitter’s frequency
		radio sources	channel. Select 1 of the 3 options for
			best reception. We advise you to
			select channel 1 as the first option.
			Next adjust the headphone’s tuning
			channel as described above.
			2) Move transmitter or headphone
			elsewhere