Philips SPB4230WA/17 manual electronics and computer system, Product highlights, What’s in the box

electronics and computer system.

Product highlights

Your UPS is equipped with the following features and functions.

Intelligent microprocessor control

Your UPS is a microprocessor-controlled unit.This means that it operates with the newest technology for high performance and powerful functionality. It is an “intelligent” protector that provides pure, reliable AC power to critical loads — guarding against electri- cal power blackouts, current fluctuations, surges and interference.The UPS will also save power, automatically turning off under back-up mode when none of the con- nected equipment is operating. Utilizing microprocessor control maximizes your UPS’s system flexibility and ensures reliability.

Advanced battery management

Visual and audible signals alert you about UPS and battery status.The self-test function allows the UPS to detect a weak battery before it is put into service.Your UPS will perform a self-test upon start-up.

Automatic voltage regulation

Allows the UPS to adapt to a wide power range and maintain a steady output of pure and reliable power to sensitive, connected equipment.

Automatic frequency sensing

Allows the UPS to automatically match frequency with the incoming utility power.

High level battery charger

Fully charges the internal battery and acts to prolong its life.

Overload protection

Guards against connecting components whose power requirements exceed that of the UPS. Functions in both in-line and battery modes.

Extended back-up time

Prolongs the time your equipment has electricity during power blackouts.

Solid State phone/fax/modem protection Provides maximum protection against surges present on standard two-wire“dial-up” phone service.

Splitter phone line protection

Splits incoming phone line into two outputs, supporting and protecting phone and modem.

Coaxial cable protection

Provides maximum protection against surges present on standard coax/broadband lines.

Rotating LCD message panel display

Displays time,AVR operation indicator, battery charge level (in AC mode), battery run time (in back-up mode), input voltage and battery load level. May be positioned horizontally or vertically.

2.1 What’s in the box

•UPS

•6 ft RG6 coaxial cable

•6 ft phone cord

•6 ft RJ45 cable

•8 ft power cord with offset, right angle plug

•(2) Adjustable rack mount brackets

•Owner’s manual

•Advanced power monitoring software with auto shutdown

2.2 What you’ll also need

•A 3-wire grounded AC outlet to supply power to the

UPS

•A pointed tipped implement, such as a pen

•All equipment being connected to the UPS

5