Philips SPB4230WA/17 manual

Models: SPB4230WA/17

1 20

Page 19

Image 19

Contents

SPB4230WA Uninterruptible Power System UPSPage Getting started Table of contentsUsing your UPS Your UPSWarnings 2 Your UPSCautions 2.1 What’s in the box Your UPS is equipped with the following features and functionselectronics and computer system Product highlightsBack panel 2.3 UPS overviewFront panel LCD message panel display3.1 Connect your UPS 3 Getting Started3.2 Connect your UPS to a phone/ fax/modem To connect telephone line protection 3.2 Connect your UPS to a TV/VCR/ DVDR/cable box3.3 Check the power requirement of your equipment 4 Using your UPSTo connect coaxial cable protection To conduct a simulation test 1 Turn on the UPS 2 Turn off the power to the UPS. Wait 5 seconds2 Wait for the power indicator to illuminate 3 Make sure the circuit breaker is set. Turn the UPS back onAuto restart 5 Using more of your UPSBack-up alarm Low battery alarm6 Storage 7 Warranty and ServiceLimited Lifetime Warranty Digital clockCALIFORNIA PROPOSITION 65 WARN- ING All Products CONNECTED EQUIPMENT WARRANTYConditions and Limitations This connected equipment warranty is null and void if Exclusions Warranty Claim Procedure8 Technical data Continuous beeping sound Other 9 Frequently asked questionsAlarm type Battery back-up Slow, beeping sound approximately 0.47Hz Low battery Rapid beeping sound approximately 1.824Hz OverloadWhat should I do if the alarm sounds continuously? PCB failure.You will have to call for service to replace the PCB