Manuals / Philips / Computer Equipment / Surge Protector

Philips SPB4230WA/17 manual PCB failure.You will have to call for service to replace the PCB

Models: SPB4230WA/17

1 20

Download 20 pages 27.21 Kb

Page 18

Image 18

PCB failure.You will have to call for service to replace the PCB.

What should I do if the alarm sounds continuously?

The alarm is alerting you that an overload situation is occurring. Immediately discon- nect a device from the UPS. If the alarm continues, disconnect another device, and so on until the alarm stops. Check the to- tal power requirements of your connected equipment and make sure it does not exceed the capacity of the UPS (1000V) before reconnecting.

Page 18

Image 18

Philips SPB4230WA/17 manual PCB failure.You will have to call for service to replace the PCB

Contents

Uninterruptible Power System UPS SPB4230WAPage Your UPS Table of contentsUsing your UPS Getting started2 Your UPS WarningsCautions Product highlights Your UPS is equipped with the following features and functionselectronics and computer system 2.1 What’s in the boxLCD message panel display 2.3 UPS overviewFront panel Back panel3 Getting Started 3.1 Connect your UPS3.2 Connect your UPS to a phone/ fax/modem 3.2 Connect your UPS to a TV/VCR/ DVDR/cable box To connect telephone line protection4 Using your UPS 3.3 Check the power requirement of your equipmentTo connect coaxial cable protection 3 Make sure the circuit breaker is set. Turn the UPS back on 2 Turn off the power to the UPS. Wait 5 seconds2 Wait for the power indicator to illuminate To conduct a simulation test 1 Turn on the UPSLow battery alarm 5 Using more of your UPSBack-up alarm Auto restartDigital clock 7 Warranty and ServiceLimited Lifetime Warranty 6 StorageCONNECTED EQUIPMENT WARRANTY CALIFORNIA PROPOSITION 65 WARN- ING All ProductsConditions and Limitations This connected equipment warranty is null and void if Warranty Claim Procedure Exclusions8 Technical data Low battery Rapid beeping sound approximately 1.824Hz Overload 9 Frequently asked questionsAlarm type Battery back-up Slow, beeping sound approximately 0.47Hz Continuous beeping sound OtherPCB failure.You will have to call for service to replace the PCB What should I do if the alarm sounds continuously?