Philips TCD138 user manual Before YOU Start, Micro-SIM card

BEFORE YOU START

	From your card, remove
The micro-SIM card	the micro-SIM card

To use your phone, you must insert a valid micro-SIM card supplied by your GSM network operator. When you switch the phone on, it may ask for the PIN code. The PIN code is the

secret code of the micro-SIM card.

The micro-SIM card contains your subscription number and phone number. It also contains a memory in which you can store phone numbers and messages. If you use your micro-SIM card on another phone, you still retain the same phone number, stored numbers, and messages.

The battery

Your phone is powered by a rechargeable battery.

•After you plug in the battery, please wait a few seconds

before pressing the On/Off button to switch the phone on.

• A battery only reaches its maximum capacity after being totally discharged and recharged 2 or 3 times.

• A battery lasts longer if you allow it to fully discharge from time to time.

•If you do not use your phone for several days, it is better to remove the battery.

Remove the battery cover

Press on the latch on the back of the phone and lift off the battery cover.

Remove the battery (if necessary)

Lift up on the bottom of the battery and remove from the phone.

2