1998 July 30
Philips Semiconductors Objective Specification, Revision 2.2
Pre-Amplifier for Hard Disk Drive with
MR-Read / Inductive Write Heads TDA5360
33
Notes
1. A supply by-pass capacitor from VCC to ground or a low pass filter may be used to optimize the PSRR.
2. A supply by-pass capacitor from VEE to ground or a low pass filter may be used to optimize the PSRR
14 ABSOLUTE MAXIMUM RATINGS
SYMBOL PARAMETER MIN. MAX. UNIT
VCC Positive supply voltage -0.5 6.0 V
VEE Negative supply voltage -6.0 0.5 V
VIN Digital input voltage -0.5 VCC+0.3V V
Vn1 Voltage on all pins except VCC, read inputs RPx, RNx, write
outputs WPx, WNx (x=0 to 11) and the ones mentionned in
this table
but not higher than
-0.5 5.5
VCC+0.5
V
V
Vn2 Voltage on write driver outputs WPx, WNx
but not larger than
VEE
VEE-0.5
VCC
VCC+0.5
V
V
Vn3 Read inputs RPx, RNx -1 1V
Tstg IC Storage temperature range -65 150 °C
TjJunction temperature range 150 °C