2002 Oct 23 2
Philips Semiconductors Product specification
40 Msps, 10-bit analog-to-digital
interface for CCD cameras TDA8783
FEATURES
•Correlated Double Sampling (CDS), AGC, 10-bit ADC
andreference regulator included, adjustable bandwidth
(CDS and AGC)
•Fully programmable via a 3-wire serial interface
•Sampling frequency up to 40 MHz
•AGC gain from 4.5 to 34.5 dB (in 0.1 dB steps)
•CDS programmable bandwidth from 4 to 120 MHz
•AGC programmable bandwidth from 4 to 54 MHz
•Standbymode available for each block for power saving
applications 20 mW (typ.)
•6 dB fixed gain analog output for analog iris control
•8-bit and 10-bit DAC included for analog settings
•Low power consumption of only 483 mW (typ.)
•5 V operation and 2.5 to 5.25 V operation for the digital
outputs
•TTL compatible inputs, TTL and CMOS compatible
outputs.
APPLICATIONS
•CCD camera systems.
GENERAL DESCRIPTION
The TDA8783 is a 10-bit analog-to-digital interface for
CCD cameras. The device includes a correlated double
sampling circuit, AGC and a low-power 10-bit
Analog-to-Digital Converter (ADC) together with its
reference voltage regulator.
TheAGC and CDS have a bandwidth circuit controlled by
on-chip DACs via a serial interface.
A 10-bit DAC controls the ADC input clamp level.
An additional 8-bit DAC is provided for additional system
controls; its output voltage range is 1.4 V (p-p) which is
available at pin OFDOUT.
ORDERING INFORMATION
TYPE
NUMBER
PACKAGE
NAME DESCRIPTION VERSION
TDA8783HL LQFP48 plastic low profile quad flat package; 48leads; body 7 ×7×1.4 mm SOT313-2