Philips Semiconductors TDA9964
12-bit, 3.0 V, 30 Msps analog-to-digital interface for CCD cameras
Objective specification Rev. 03 — 16 January 2001 6 of 23
9397 750 07918 © Philips Electronics N.V. 2001. All rights reserved.
8. Limiting values[1] The supply voltages VCCA, VCCD and VCCO may have any value between−0.3 and+7.0 V provided that the supply voltage difference
∆VCC remains as indicated.
9. Thermal characteristics10. CharacteristicsTable 4: Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
VCCA analog supply voltage [1] −0.3 +7.0 V
VCCD digital supply voltage [1] −0.3 +7.0 V
VCCO digital outputs supply voltage [1] −0.3 +7.0 V
∆VCC supply voltage difference:
between VCCA and VCCD −0.5 +0.5 V
between VCCA and VCCO −0.5 +1.2 V
between VCCD and VCCO −0.5 +1.2 V
Viinput voltage referenced to AGND −0.3 +7.0 V
Iodata output current −±10 mA
Tstg storage temperature −55 +150 °C
Tamb ambient temperature −20 +75 °C
Tjjunction temperature −150 °C
Table 5: Thermal characteristics
Symbol Parameter Conditions Value Unit
Rth(j-a) thermal resistancefrom junction to ambient in free air 76 K/W
Table 6: Characteristics
V
CCA
=V
CCD
= 3.0V; V
CCO
= 2.7V; f
pix
= 30MHz; T
amb
=25
°
C; unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
Supplies
VCCA analog supply voltage 2.7 3.0 3.6 V
VCCD digital supply voltage 2.7 3.0 3.6 V
VCCO digital outputs supply voltage 2.5 2.7 3.6 V
ICCA analog supply current all clamps active −60 −mA
ICCD digital supply current −3−mA
ICCO digital outputs supply current CL=10 pF on all data
outputs; input ramp
response time is 800 µs
−1−mA