TSU9400 Starter’s Guide

Charging the Control Panel

When the Battery level icon on your screen turns red, it is time to charge the Control Panel. Depending on how your installer has configured the Control Panel, it can be operated for one to several days.

Note The lifetime of the battery depends on the time out settings and the settings of the wireless network configured by your installer. If you notice that the battery is deteriorating, please contact your installer.

When you place the Control Panel in the docking station, the red

Charging LED on the front of the docking station lights up.

When the Charging LED fades out, the Control Panel is fully charged. This can take 3 to 4 hours.

When the battery is low and the Charging LED does not light up, make sure that:

the power switch on the left side of the Control Panel is switched to “1”.

the docking station is plugged in the wall outlet. When it is plugged in, the docking station glows.

the Control Panel is placed properly in the docking station.

the connector in the docking station is clean and free of obstructions.

Tip It is advised to place the Control Panel in the docking station after use. Even when the screen of the Control Panel turns black, the Control Panel is still using power.

Enjoying Your Pronto Control Panel

Controlling Your Home Theater

Activating the screen of the Control Panel

Tap the touch screen with the stylus enclosed or with your finger.

-Or-

Press the Backlight key.

3

Page 6
Image 6
Philips TSU9400 manual Charging the Control Panel, Enjoying Your Pronto Control Panel, Controlling Your Home Theater