Philips VRX242AT On-Screen Status Displays, Status Display example only, If you select Status OFF

Models: VRX242AT

1 48
Download 48 pages 43.4 Kb
Page 20
Image 20

VRX240comb 4/8/99 8:45 PM Page 20

20 On-Screen Status Displays

A status display will appear when you press the STATUS/EXIT button or certain function buttons. The contents of the status dis- play will vary. To choose the status display mode, follow the steps below.

If you select STATUS ON, then select COUNTER ONLY ON:

Whenever you press the STOP/p button or the PLAY/o but- ton, the status display will appear for five seconds. After five seconds, only the counter will remain on-screen. You must

press the STATUS/EXIT button to remove it.

If you select STATUS ON, then select COUNTER ONLY OFF:

Whenever you press the STOP/p button or the PLAY/o but- ton, the status display will appear for five seconds.

If you select STATUS OFF:

The status display will not appear when you press function but- tons. You must press the STATUS/EXIT button to see the sta- tus display.

1

Press the MENU button.

2

Press the PLAY/o button or the STOP/p button to select VCR SET UP, then press the F.FWD/B button.

3

Press the PLAY/o button or the STOP/p button to select ON SCREEN MODE, then press the F.FWD/B button.

4

Press the PLAY/o button or the STOP/p button to select STATUS, then press the F.FWD/B button so that OFF (or ON) appears beside STATUS.

SELECT op CHOOSE B

STATUS

[ON]

COUNTER ONLY

[OFF]

TO END PUSH EXIT

5

If you set STATUS to OFF, go to step 6. If you set STA- TUS to ON, press the PLAY/o button or the STOP/p button to select COUNTER ONLY, then press the F.FWD/B button so that OFF (or ON) appears beside it.

6

Press the STATUS/EXIT button.

Status Display (example only)

Button

Pressed

 

Time

 

 

 

 

 

 

 

 

 

 

 

STOP

 

12:00 AM

 

 

 

 

CH10

SLP

M 1:23:45

 

 

 

 

 

 

 

 

 

 

 

Channel

Tape

Counter

Speed

and

 

 

 

Counter

 

 

 

Memory

Helpful Hints

If the channel you select has no broadcast, the screen will become solid blue.

You may not access a status display when viewing a still picture, during slow motion playback, or when the F.FWD/B or REWIND/s button is pressed during playback.

Page 20
Image 20
Philips VRX242AT owner manual On-Screen Status Displays, Status Display example only, If you select Status OFF