VRX240comb 4/8/99 8:45 PM Page 25
Read and follow the steps below to record a television program.
1
Turn on the TV and set it to channel 3 or 4, whichever the CH3/CH4 switch on the back of the VCR is set to.
2
Insert a tape with its record tab intact in the VCR.
3
If the VCR light appears on the display panel, go to step 4. If the
VCR light does not appear, press the VCR/TV button once.
4
Press the SPEED button until the desired tape speed appears briefly
5
Use the CHANNEL o/p buttons or the Number buttons to select the channel to be recorded.
6
Press the REC(ord)/OTR button once to start recording. The REC light will appear.
7
To pause the recording, press the PAUSE/STILL button once. The REC light will flash. To resume recording, press the REC(ord)/OTR button or press the PAUSE/STILL button again. The REC light will come on again.
8
To stop recording, press the STOP/p button.
Recording 25
1Turn on the TV.
2Insert a tape in the VCR.
| POWER |
| VCR/TV | EJECT | 3 |
| 1 | 2 | 3 |
|
|
| 4 | 5 | 6 |
| 5 |
| 7 | 8 | 9 | CHANNEL | |
|
|
| |||
4 | VCR PLUS+ | 0 | +100 |
|
|
SPEED | TIME SEARCH | MEMORY |
| ||
|
| ||||
| MENU | STATUS/EXIT | CLEAR | SLOW |
|
6 | REWIND | /PLAY | F.FWD | 7 | |
REC/OTR | /STOP | PAUSE/STILL | |||
|
|
|
|
| 8 |
Helpful Hints
•If you press the REC(ord)/OTR but- ton when there is not a tape in the VCR, NO CASSETTE will flash on- screen.
•If you press the REC(ord)/OTR but- ton while a tape without a record tab is in the VCR, the VCR will eject the tape and PROTECTED CAS- SETTE CANNOT RECORD will flash
•Other recording options are on pages 26 - 36.
•You can change the tape speed during a recording, but some distor- tion will appear on the tape.
•The VCR will record in a preset vol- ume.
