VRX240comb 4/8/99 8:45 PM Page 34
34 Timer Recording With the VCR Plus+ Programming System
Follow these steps to set a timer recording with the PlusCode programming numbers in your TV guide. Before you begin:
●Set up the channels at the VCR (page 12).
●Set up the VCR Plus+ and Cable/TV channel numbers (pages 32 - 33).
●Set the clock (page 15).
●Put a tape in the VCR.
●Turn on the VCR power. The VCR light should appear on the display panel. If it does not, press the VCR/TV button once.
Do each step within 60 seconds of the previous step.
1
Press the VCR PLUS+ button.
VCR PLUS+ PROG.
PLUS CODE : – – – – – – – –
TO END PUSH EXIT
2
Press the Number buttons to enter the PlusCode pro- gramming number of the program you wish to record. Then, press the VCR PLUS+ button.
VCR PLUS+ PROG.
PLUS CODE : 13285 – – –
TO SET PUSH VCR+
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
3
Press the PLAY/o button or the STOP/p button to select a ONCE, DAILY, OR WEEKLY recording. Then, press the F.FWD/B button.
●ONCE: The VCR will record a TV program on any day you choose, up to 12 months away.
●DAILY: The VCR will record every day from Monday to Friday
– starting at the same time and recording for the same length of time.
●WEEKLY: The VCR will record on the same day, at the same time, and for the same length of time every week.
VCR PLUS+ PROG.
→ONCE DAILY WEEKLY
SELECT op CHOOSE B
TO END PUSH EXIT
POWERVCR/TV 
EJECT
2 | 1 | 2 | 3 |
|
|
4 | 5 | 6 | CHANNEL |
| |
1 | 7 | 8 | 9 |
|
|
VCR PLUS+ | 0 | +100 |
|
| |
SPEED | TIME SEARCH | MEMORY |
| ||
| MENU | STATUS/EXIT | CLEAR | SLOW | 3 |
| REWIND | /PLAY | F.FWD | ||
| REC/OTR | /STOP | PAUSE/STILL | ||
Helpful Hints
•CODE ERROR may flash
•If the VCR PLUS+ CROSS REF. MAP reappears after step 2, the VCR PLUS + channel number for the recording you entered was higher than 99. In this case, enter the cor- rect CABLE/TV channel in the map. Then, press the MENU button and continue from step 3.
•If CLASH flashes
