Automatic Operation Features | Philips VRZ220AT, VRZ250AT specification

VRZ220/250 layout 4/8/99 10:11 PM Page 37

Automatic Operation Features 37

The following playback features will always operate.

Automatic Playback

When you put a tape in the VCR, the power will come on auto- matically. If the tape’s record tab is missing, playback will begin. If a timer recording is set, the power will not come on automati- cally when you insert a tape with the record tab intact.

If a timer recording is set and the VCR power is off, the VCR will eject the tape if the record tab is missing.

Automatic Rewind, Eject, Off

When a tape is played, fast forwarded, or recorded to its end, the VCR will rewind the tape, stop, eject the tape, and turn itself off. If the real-time counter memory is set, the VCR will only rewind to the point at which the counter is set to zero, then stop. The VCR will not eject the tape automatically or shut itself off.

Tape Eject

A tape can be ejected with the VCR power on or off (but the VCR must be plugged in). If a timer recording is set, a tape can only be ejected with the power on. Make sure you insert a tape and turn off the VCR power for the timer recording.

Automatic Tracking Adjustment

The VCR adjusts tracking automatically to give you the best possi- ble picture quality. With some recordings, however, you may get a better picture using the manual tracking controls (see below).

Manual Tracking

To manually adjust the tracking during playback and slow motion playback (VRZ250 only) press the CHANNEL o/p buttons on the VCR. (The CHANNEL o/p buttons on the remote control will not adjust tracking.)

Tracking will return to Automatic Tracking Adjustment when you press the STOP/p button or insert a tape.

You cannot manually adjust the tracking of a Still picture. However, you may press the CHANNEL o/p buttons on the VCR to remove vertical jitter in a Still picture.

Before	After
Tracking	Tracking
Adjustment	Adjustment

Image 37

Philips VRZ220AT, VRZ250AT owner manual Automatic Operation Features

Contents

VRZ220AT VRZ250AT For Customer Use Dear Philips Magnavox product owner Introduction Features Table of Contents Before Using Your VCR Disconnect the antenna or cable from your TV Hookups Without a Cable Box / Direct Broadcast System CH3 Plug in the TV and the VCR Connections Hookups With a Cable Box / Direct Broadcast SystemRecording/Viewing Any Channel Cable Box/DBS Recording One Channel/Watching AnotherRF coaxial Cable TV’s Antenna Jack VRZ250 Hookups With a Stereo TVVRZ220 2Turn on the TV Turning on Your VCRPress the Menu button. The display shown below will appear Press the Menu button Automatic Channel Setup Adding/Deleting Channels Automatic Channel Setup cont’d Press the STATUS/EXIT button once or twice to exit Reviewing Memorized Channels You make each entry within 60 seconds of the previous entry Follow the steps below to set your VCR’s clock. Make sure Daylight-Saving Time Language Selection Power Button Remote Control ButtonsTime Search Button VRZ250 only Menu Button Eject Button Remote Control Buttons cont’dPress to eject the tape Clear Button Status Display example only On-Screen Status DisplaysIf you select Status ON, then select Counter only on If you select Status ON, then select Counter only OFF VCR Display Panel Front Panel Rear Panel Read and follow the steps below to play a tape Playing 1Turn on the TV 2Insert a tape in the VCR Recording Recording One Channel/Watching Another Remote control to select channel 03 or 04 at the TVTo return to the channel being recorded, use the TV Press the VCR/TV button to put the VCR in VCR posi One-Touch Recording Set up the channels at the VCR Daily Timer Recording Slots will flash on-screen Timer Recording cont’d Tape Speeds Press the STATUS/EXIT button. Program WAS COMTape Speed Maximum Record/Playback Time Type T160 T120 T60 Standard Play Press the PLAY/o button or the STOP/p button to select Checking or Cancelling Timer RecordingsPROGRAM, then press the F.FWD/B button Program REVIEW, then press the F.FWD/B button Rerecording Tape Duplication Channel the CH3/CH4 switch on VCR 2 is set toTurn on the TV and set it to channel 03 or 04, whichever Press the F.FWD/B button so that on appears beside Repeat Play Press the Time Search button Time Search VRZ250 only Real-Time Counter Memory Forward and Reverse Searching SP/LP/SLP Special Effects PlaybackSuper High Speed Searching LP/SLP Viewing a Still Picture Automatic Operation Features Mono Understanding On-Screen DisplaysMonitor Or Receiver Multi-Channel Television Sound System VRZ250 only cont’d Please see additional notes on Hi-Fi Stereo Sound System VRZ250 only Hi-Fi Stereo Sound System VRZ250 only cont’d Helpful Hints Helpful Hints cont’d Cable Box/DBS Output Channel 03 or Glossary Specifications Model # Serial # Limited Warranty Index Supplied Accessories