Specifications | Philips VRZ220AT, VRZ250AT manual

VRZ220/250 layout 4/8/99 10:12 PM Page 45

Specifications 45

Video Heads

Two heads (VRZ220)

Four heads with Hi-Fi stereo (VRZ250)

Video Signal

EIA standards; NTSC color

Antenna

VHF/UHF – 75 ohm external antenna terminal

VHF Output Signal

Channel 03 or 04 (switchable) 75 ohms unbalanced

Power Requirement

120V AC; 60Hz

Power Consumption

16W (VRZ220)

18W (VRZ250)

Operating Temperature

41°F (5°C) to 104°F (40°C)

Relative Humidity

10% to 80%

Weight

5.5lbs. (2.5 kg.) (VRZ220)

5.73lbs. (2.6 kg.) (VRZ250)

Dimensions

14-3/16” (W) x 3-1/16” (H) x 10” (D) (360mm x 92mm x 230mm)

Tuner Broadcast Channels

VHF 2-13, UHF 14-69

Cable TV Channels

2 – 13 Midband: A – 1 Superband: J – W Hyperband: A-5 – A-1 Special Channel: 5A Ultraband: 37 – 94, 100 – 125

NOTE: Designs and specifications are subject to change without notice.

Image 45

Philips VRZ220AT, VRZ250AT owner manual Specifications

Contents

VRZ220AT VRZ250AT For Customer Use Dear Philips Magnavox product owner Introduction Features Table of Contents Before Using Your VCR Disconnect the antenna or cable from your TV Hookups Without a Cable Box / Direct Broadcast System CH3 Plug in the TV and the VCR Hookups With a Cable Box / Direct Broadcast System ConnectionsRecording/Viewing Any Channel Recording One Channel/Watching Another Cable Box/DBSRF coaxial Cable TV’s Antenna Jack Hookups With a Stereo TV VRZ250VRZ220 Turning on Your VCR 2Turn on the TVPress the Menu button. The display shown below will appear Press the Menu button Automatic Channel Setup Adding/Deleting Channels Automatic Channel Setup cont’d Press the STATUS/EXIT button once or twice to exit Reviewing Memorized Channels You make each entry within 60 seconds of the previous entry Follow the steps below to set your VCR’s clock. Make sure Daylight-Saving Time Language Selection Power Button Remote Control ButtonsTime Search Button VRZ250 only Menu Button Eject Button Remote Control Buttons cont’dPress to eject the tape Clear Button Status Display example only On-Screen Status DisplaysIf you select Status ON, then select Counter only on If you select Status ON, then select Counter only OFF VCR Display Panel Front Panel Rear Panel Read and follow the steps below to play a tape Playing 1Turn on the TV 2Insert a tape in the VCR Recording Recording One Channel/Watching Another Remote control to select channel 03 or 04 at the TVTo return to the channel being recorded, use the TV Press the VCR/TV button to put the VCR in VCR posi One-Touch Recording Set up the channels at the VCR Daily Timer Recording Slots will flash on-screen Timer Recording cont’d Tape Speeds Press the STATUS/EXIT button. Program WAS COMTape Speed Maximum Record/Playback Time Type T160 T120 T60 Standard Play Press the PLAY/o button or the STOP/p button to select Checking or Cancelling Timer RecordingsPROGRAM, then press the F.FWD/B button Program REVIEW, then press the F.FWD/B button Channel the CH3/CH4 switch on VCR 2 is set to Rerecording Tape DuplicationTurn on the TV and set it to channel 03 or 04, whichever Press the F.FWD/B button so that on appears beside Repeat Play Press the Time Search button Time Search VRZ250 only Real-Time Counter Memory Forward and Reverse Searching SP/LP/SLP Special Effects PlaybackSuper High Speed Searching LP/SLP Viewing a Still Picture Automatic Operation Features Mono Understanding On-Screen DisplaysMonitor Or Receiver Multi-Channel Television Sound System VRZ250 only cont’d Please see additional notes on Hi-Fi Stereo Sound System VRZ250 only Hi-Fi Stereo Sound System VRZ250 only cont’d Helpful Hints Helpful Hints cont’d Cable Box/DBS Output Channel 03 or Glossary Specifications Model # Serial # Limited Warranty Index Supplied Accessories