VRZ220/250 layout 4/8/99 10:11 PM Page 29
Timer Recording (cont’d) 29
4
Use the Number buttons (1 - 8) to select a slot in which to store the timer recording. There are eight slots. Open
slots will flash on-screen.
NOTE: If you enter a number for a slot that has already been used to store a timer recording, PREVIOUSLY SET PROGRAM will appear on- screen briefly. Information about the program in that slot will appear
5
Use the Number buttons to enter the channel you want to record.
●If you have a basic antenna or cable hookup (as shown on pages
●If you are recording from line input, press 0, 0. A/V IN will appear
●If you are using a Cable Box/DBS, enter the Cable Box/DBS output channel (03 or 04). Set the Cable Box/DBS to the chan- nel you want to record. Leave the Cable Box/DBS on for the timer recording. See page eight for details.
ONE TIME PROGRAM
PROGRAM | 1 |
CHANNEL | – – |
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
6
Press two Number buttons for the hour you want the recording to begin. Press two Number buttons for the minute you want the recording to begin. Press 1 for AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.
POWER |
| VCR/TV | EJECT |
1 | 2 | 3 |
|
4 | 5 | 6 |
|
7 | 8 | 9 | CHANNEL |
| |||
| 0 | +100 |
|
SPEED | TIME SEARCH | MEMORY | |
MENU | STATUS/EXIT | CLEAR | SLOW |
REWIND | /PLAY | F.FWD | |
REC/OTR | /STOP | PAUSE/STILL | |
ONE TIME PROGRAM
PROGRAM | 1 |
CHANNEL | 10 |
TIME ON | – |
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
7
Follow the instructions in step 6 to enter the recording’s stop time. (AM or PM will be set automatically.)
ONE TIME PROGRAM
PROGRAM | 1 |
CHANNEL | 10 |
TIME ON | 09:30 PM |
TIME OFF | – |
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
Instructions continue on page 30.
Helpful Hint
•Entries that do not match the VCR’s clock or calendar will cause a ques- tion mark to appear
