Philips VRZ360 Automatic Channel Setup, Press the VCR button, then press the Menu button

VRZ360 4/7/99 9:53 PM Page 11

Automatic Channel Setup 11

Although your VCR may automatically memorize the channels you receive when you turn it on for the first time, this function lets you set up channels again. Make each entry within one minute of the previous entry.

5 Wait for the VCR to set up channels.

1

Press the VCR button, then press the MENU button.

SELECT , 9 CHOOSE :/OK

AVCR SET UP TUNER SET UP INITIAL SET UP

TO END PUSH EXIT

2

Press the PLAY 8 or STOP 9 button to select TUNER SET UP, then press the FF :/OK button.

SELECT , 9	CHOOSE :/OK
A CABLE/ANTENNA		CABLE

AUTO CH. PROGRAMMING

ADD/DELETE CH.

1	TV					VCR
	CBL/DBS		–		+	POWER
	MENU STILL/SLOW					cEJECT
	EXIT/STATUS		REW		PLAY	FF /OK
					:
2				;;		::
					L
	TIMER [REC/OTR				STOP	S.SEARCH
	1	+	2	+	3
	START		STOP		DATE	CH
	4	–	5	–	6
	DBS		DAILY		WEEKLY
	7		8		9
						VOL
	SPEED		0		CLEAR

QUICK PROGRAMMING

VCR/TV 7;;INDEX ::7 AUDIO/MUTE

3

4

TO END PUSH EXIT

3

Press the FF :/OK button repeatedly so that ANT (if you have an antenna) or CABLE (if you have a cable connec- tion) appears beside CABLE/ANTENNA.

4

Press the STOP 9 button to select AUTO CH. PRO- GRAMMING, then press the FF :/OK button. AUTO CH. SET PROCEEDING PLEASE WAIT and a scale that shows the progress of channel setup will appear on-screen. The VCR will memorize all the channels you receive.

5

Wait for a few minutes while the VCR sets up channels. When programming is complete, AUTO CH. SET COMPLETED will appear on-screen. Then, the programming of the lowest chan- nel number placed in the VCR’s memory will appear on-screen. Now when you press the CH(annel) 8/9 buttons, you will scan only through channels you receive.

Helpful Hints

•If the channel you select has no broadcast, the screen will be solid blue.

•The two Line Input modes will always be stored in the VCR’s mem- ory at channel 00. To select A/V IN FRONT or A/V IN REAR, press 0,0, then press the CH(annel) 8/9 but- tons so that A/V IN FRONT or A/V IN REAR appears on-screen briefly. To exit Line Input mode, use the CH(annel) 8/9 buttons to select a channel other than 00.