Philips VRZ360 owner manual On the screen, Operation, If on Screen Mode is set to on or Counter

VRZ360 4/7/99 9:53 PM Page 25

On-Screen Status Displays 25

An on-screen status display, which includes the current time, channel, and other information (see illustration of the status dis- play at right), will appear when you press the EXIT/STATUS but- ton or certain function buttons. The contents of the status display may vary.

ON SCREEN MODE ON:

•Whenever you press the PLAY 8 button or the STOP 9 but- ton to stop playback, some of the contents of the status display will appear for five seconds.

ON SCREEN MODE COUNTER:

•The tape counter will appear on-screen at all times. Whenever you press the PLAY 8 button or the STOP 9 button to stop playback, some of the contents of the status display will appear for five seconds. After five seconds, only the counter will remain

on the screen.

ON SCREEN MODE OFF:

•No status display will appear when you press function buttons or the EXIT/STATUS button.

To select a status display mode, follow these steps.

1

Press the VCR button, then press the MENU button.

SELECT , 9 CHOOSE :/OK

Sound program available Channel

Button pressed					Time
		STOP		12:00		PM
		STEREO			CH. 12
		REMAINING
		TIME	10:59	INDEX -1
		SLP	0:00:00	HIFI
						Index
	Tape
						operation
	speed

Sound program selected

Real-time counter

Tape time remaining

AVCR SET UP TUNER SET UP INITIAL SET UP

TO END PUSH EXIT

2

Press the PLAY 8 or STOP 9 button to select VCR SET UP, then press the FF :/OK button.

SELECT , 9 CHOOSE :/OK

A ON SCREEN MODE	ON
TIMER REC SPEED	MANUAL
VIDEO STABILIZER	OFF
PICTURE	NORMAL
AUDIO OUT	HIFI
STEREO/SAP	STEREO
TO END PUSH EXIT

3

Press the PLAY 8 or STOP 9 button to select ON

SCREEN MODE, if necessary.

4

Press the FF :/OK button repeatedly so that ON,

COUNTER, or OFF appears beside ON SCREEN MODE.

5

Press the EXIT/STATUS button.

Helpful Hints

•If ON SCREEN MODE is set to ON or COUNTER:

•You may bring up the status dis- play at any time by pressing the EXIT/STATUS button. (The excep- tion is during Slow, Search, or Still mode.) The display will appear for about five seconds.

•Channel numbers (when tuned) will appear for a few seconds.

•When tape playback is stopped, press the EXIT/STATUS button to see the time, real-time counter, or current channel number on the dis- play panel. During tape playback, press the EXIT/STATUS button to see the time or real-time counter on the display panel. The channel will not appear.

•Depending on the type of tape used, the tape time remaining may not appear right away, or may not be correct. Also, “– – : – –” may appear, or the display may flash.