Philips VRZ360 owner manual Press the EXIT/STATUS button. Program WAS COM

VRZ360 4/7/99 9:53 PM Page 35

Timer Recording With the VCR Plus+ Programming System (cont’d) 35

5

Press the FF :/OK button. If the VCR PLUS+ and CABLE/TV channel lists appear on-screen, the CABLE/TV channel has not been set for the VCR PLUS+ channel of the program you have set in step 4. Complete steps 6 - 7 on page 33.

TV VCR

6

•If you want to record the program one time only, go to step 7. You may also press the Number 8/DAILY or 9/WEEK- LY button repeatedly to select a ONE TIME PROGRAM.

•If you want to record the program daily, press the Number 8/DAILY button. The VCR will record a program every day from Monday through Friday, starting at the same time and recording for the same length of time.

•If you want to record the program every week, press the Number 9/WEEKLY button. The VCR will record a program on the same day, at the same time, for the same length of time every week.

DAILY PROGRAM (MON-FRI)

PROGRAM	1
CHANNEL +/– 12
START +/–	08:00	PM
STOP +/–	10:00	PM
REC SPEED	SP
DATE +/–	07/31/98
	FRIDAY

SET DAILY=8 OR WEEKLY=9

TO END PUSH EXIT

7

Press the SPEED button to select the tape speed. The selected tape speed, SP or SLP, will appear beside REC SPEED.

8

Press the EXIT/STATUS button. PROGRAM WAS COM-

PLETED/PLEASE TURN OFF VCR FOR TIMER RECORDING should appear on the screen. (If PROGRAM NOT COMPLETED appears, begin again from step 1.) After five seconds, the on- screen display will disappear.

9

Press the POWER button to turn off the VCR. The VCR must be turned off for a timer recording to take place.

The r light will appear on the display panel. The r light and the Cassette-Inside light will flash when you turn off the VCR if there is not a tape in the VCR.

The VCR must be off for a timer

recording to take place!

Make sure a tape is in the VCR.

	CBL/DBS	–	+	POWER	9
8	MENU STILL/SLOW			cEJECT
	EXIT/STATUS	REW	PLAY	FF /OK	5
			:
		;;		::
			L
	TIMER [REC/OTR		STOP	S.SEARCH
	1	2	3
6	+	+
	START	STOP	DATE	CH
	4	5	6
	–	–
	DBS	DAILY	WEEKLY
	7	8	9	VOL
7	SPEED	0	CLEAR
	QUICK PROGRAMMING
	VCR/TV	7;;INDEX ::7		AUDIO/MUTE

Helpful Hints

•If ERROR appears at step 6 when you select DAILY, the PlusCode pro- gramming number you entered is for a program that is broadcast on Saturday or Sunday. The program cannot be recorded repeatedly from Monday through Friday.

•To exit the VCR Plus+ programming system at any step, press the EXIT/STATUS button.

•PROGRAM NOT COMPLETED/ CLASH may appear on-screen for five seconds at step 8 if the timer recording you programmed overlaps with another timer recording. To cancel the overlapping timer record- ing, follow the steps on page 39.