Philips VRZ360 owner manual Display Panel

VRZ360 4/7/99 9:53 PM Page 22

22 Display Panel

VCR Display Panel		Remote Sensor
Information about VCR operations appears		Receives a signal from your remote
here. Different information appears at differ-		control so you can operate your VCR
ent times. The display is brighter when the		from a distance. Press the VCR button
VCR power is on. The display dims automati-		on the remote control before pressing
cally when you turn off the VCR power.		other VCR operation buttons.
Cassette Compartment
Insert a tape here.			TIMER Light
			This light appears when a
	REW	FF	timer recording is pro-
		PLAY
POWER STILL/		STOP/EJECT	grammed or is in
PAUSE
VCR/TV	CHANNEL		progress. Details are on
VIDEO L AUDIO R	REC/OTR		pages 34 - 39. This light
	SP SLP
HQ	VCR
lingual		19∝m Hi-Fi
			blinks rapidly if the VCR
			is turned off to set a
			Timer Recording but a
			tape is not in the VCR.

		SP SLP
			VCR
	Operation indicators			Clock/Counter/Channel Display
These indicators tell you the				Each time you press the EXIT/STATUS button,
current operation of the VCR.				information on the display panel will change.
3: Play, Forward and Reverse				When tape playback is stopped, press the
	Searching			EXIT/STATUS button repeatedly to see: the cur-
\: Record				rent time (when the clock is set); the real-time
\I: Record Pause				counter; and the current channel number. During
3I: Still Picture				tape playback, press the EXIT/STATUS button
Tape Speed Lights				repeatedly to see the real-time counter or the
				current time.
This light indicates the current
				Line Input Mode Light
tape speed. This VCR will play
				When L appears here, the VCR is in Line Input
tapes recorded in LP speed, but
				mode. When L-F appears, you have selected A/V
LP will not appear on the display
				IN FRONT. Your audio and video cables should
panel. This VCR will not record in
				be connected to the AUDIO/VIDEO jacks on the
LP speed. Details on tape speeds
				front of the VCR if you are dubbing tapes. When
are on pages 37 and 50.
				L-1 appears here, you have selected A/V IN REAR.
VCR Light
				Your audio and video cables should be connected
This light appears when the VCR is				to the AUDIO/VIDEO jacks on the back of the
				VCR if you are dubbing tapes. To select A/V IN
in VCR position.
				FRONT or A/V IN REAR, press 0,0, then press
Cassette-Inside Light
				the CH(annel) 8/9 buttons so that A/V IN
This light appears when a tape is in the VCR. It				FRONT or A/V IN REAR appears on-screen
blinks when a tape is being ejected. This light blinks				briefly. To exit Line Input mode, press the
rapidly if the VCR is turned off to set a Timer				Number buttons or the CH(annel) 8/9 buttons
Recording but there is not a tape in the VCR.				to select another channel.