One-Touch Recording, Starting an OTR | Philips VRZ360 manual

VRZ360 4/7/99 9:53 PM Page 30

30 One-Touch Recording

The One-Touch Recording (OTR) function allows you to start an immediate timed recording 30 minutes to six hours long of the channel you are watching. Before you begin, make sure:

•Channels are set up. Details are on pages 11 - 12.

•The desired recording speed (SP or SLP) has been selected with the SPEED button. Details are on pages 37 and 50.

•There is a tape in the VCR. Make sure the tape’s record tab is intact (see page 5) and the tape is long enough to record the program(s). If the end of the tape is reached during an OTR, recording will stop. The VCR will eject the tape and turn itself off.

•The VCR is in VCR position. (The VCR light will appear on the display panel of the VCR when the VCR is in VCR position. If the VCR light does not appear, press the VCR/TV button once.)

Starting an OTR

1

Press the VCR button.

2

Use the CH(annel) 8/9 buttons or the Number buttons to select the channel you want to record.

3

Press the REC(ord)/OTR button repeatedly, until the desired recording length appears briefly on-screen and on the display panel. The \ light will flash on the display panel.

OTR (0:30)

SLP

Stopping an OTR

To stop an OTR before recording is finished, press the STOP 9 button.

To cancel the OTR but continue recording, press the REC(ord)/OTR button until REC appears in the upper left corner of the TV screen. (On SCREEN MODE cannot be set to OFF. Details are on page 25.) The \ light will remain on the display panel.

	TV			VCR	1
	CBL/DBS	–	+	POWER
	CBL/DBS	–	+
	MENU STILL/SLOW			cEJECT
3	EXIT/STATUS	REW	PLAY	FF /OK
	EXIT/STATUS	REW	:	FF /OK
		;;		::
			L
	TIMER [REC/OTR		STOP	S.SEARCH
	TIMER [REC/OTR			S.SEARCH	2
	1	2	3
	+	+
	START	STOP	DATE	CH
	4	5	6
	–	–
	DBS	DAILY	WEEKLY
	7	8	9
				VOL
	SPEED	0	CLEAR
	QUICK PROGRAMMING
	VCR/TV	7;;INDEX ::7		AUDIO/MUTE

Helpful Hints

•To check the time remaining for an OTR after the OTR is in progress, press the EXIT/STATUS button.

•To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired length appears on-screen.

•If the preset time for a timer recording comes up during an OTR, the OTR has priority.

Image 30

Philips VRZ360 One-Touch Recording, Starting an OTR, Stopping an OTR, Channels are set up. Details are on pages 11

Contents

VRZ360 Dear Philips Magnavox product owner For Customer Use Features Safety PrecautionsIntroduction Table of Contents Before Using Your VCR Hookups Without a Cable Box Disconnect the antenna or cable from your TV Hookups Without a Cable Box cont’d CH3 CH4 Recording/Viewing Any Channel Hookups With a Cable Box/Direct Broadcast SystemConnections Cable Box/DBS With this connection Cable signal Cable Box/DBSRecording One Channel/Watching Another TV’s Turning on Your VCR Press the FF /OK button. The menu shown below will appear Automatic Channel Setup Press the VCR button, then press the Menu button Automatic Channel Setup cont’d Adding/Deleting Channels Manual Clock Setting Instructions continue on Setting the Clock cont’d When the month and day are correct, press the FF /OK buttonPress the EXIT/STATUS button Time Zone Selection Press the FF /OK button repeatedly to select Time Manual PBS Channel Selection Automatic PBS Channel Selection Daylight-Saving Time Press the VCR button, then press the Menu button Language Selection Press the EXIT/STATUS button Remote Control Buttons EXIT/STATUS Button Timer ButtonMenu Button Speed Button Display Panel Front Panel Rear Panel If on Screen Mode is set to on or Counter On the screenOperation Setting the Remote Control to Operate a TV Find the code for your TV Setting the Remote Control to Operate a Cable Box/DBS Find the code for your Cable Box/DBS If playback does not start automatically, press the Play PlayingRead and follow the steps below to play a tape Button. The 3 light will appear on the VCR display panel Press the VCR button VCR records in a preset volumeRecording Light will appear on the VCR display panel Starting an OTR Channels are set up. Details are on pages 11One-Touch Recording Stopping an OTR Recording One Channel/Watching Another Setting Up the VCR Plus+ Programming System ChannelsStation Setting Up the VCR Plus+ Programming System cont’d 2Examine the lists on Timer Recording With the VCR Plus+ Programming System Press the EXIT/STATUS button. Program WAS COM Press the VCR button, then press the Timer button Quick ProgrammingComplete each step within 60 seconds of the previous step Standard Play Tape SpeedsTape Speed Maximum Record/Playback Time T160 T120 T60 Long Play Quick Programming cont’d Checking, Editing, or Clearing Timer Programmed timer recordings will appear Timer Recording Speed Setting Follow the steps below to set Timer REC Speed to Auto Rerecording Tape Duplication VCR 1 will play your tape. Insert a prerecorded tape in VCRAudio and video cables are not included Index Search Multi-Channel Television Sound System Receiving a Stereo BroadcastReceiving a Second Audio Program Multi-Channel Television Sound System cont’d Hi-Fi Stereo Tape Playback Video Stabilizer Incredible Picture Viewing a Still Picture Playback OptionsForward and Reverse Searching Viewing a Slow Motion Picture Automatic Operation Features Glossary Cable Box/DBS Output Channel channel 03 or Specifications Helpful Hints Helpful Hints cont’d Limited Warranty Model # Serial # Slp Antenna in jack With a stereo TV Ac power cord Hookups Slow motion AccessoriesGlossary Stabilizer Safety precautions Tapes Helpful hints Clearing Supplied Accessories