Philips VRZ344AT Automatic Channel Setup, Press the VCR button, then press the Menu button

VRZ364/VRZ344 4/7/99 8:10 PM Page 11

Automatic Channel Setup 11

Although your VCR may automatically memorize the channels you receive when you turn it on for the first time, this function lets you set up channels again. Make each entry within one minute of the previous entry.

1

Press the VCR button, then press the MENU button.

SELECT , 9 CHOOSE :/OK

5 Wait for the VCR to set up channels.

CBL/DBS	TV	VCR	1
VCR/TV	POWER	EJECT
		c

AVCR SET UP TUNER SET UP INITIAL SET UP

TO END PUSH EXIT

2

Press the PLAY 8 or STOP 9 button to select TUNER SET UP, then press the FF :/OK button.

SELECT , 9 CHOOSE :/OK

A CABLE/ANTENNA CABLE

AUTO CH. PROGRAMMING

ADD/DELETE CH.

TO END PUSH EXIT

3

Press the FF :/OK button repeatedly so that ANT (if you have an antenna) or CABLE (if you have a cable connec- tion) appears beside CABLE/ANTENNA.

QUICK PROGRAMMING

1		+	2	+	3
START		........	STOP	........	DATE
4			5		6
		–		–
DBS			DAILY	WEEKLY
7			8		9
SPEED			0	CLEAR
		STILL/SLOW			+
–			c
REW					FF
			PLAY :
;;					::	2-4
			STOP L		/OK
VOL			MENU		CH
		EXIT/STATUS
			TIMER			1
SKIP	7;;INDEX ::7				AUDIO/MUTE
JOG/SHTL					REC /OTR
			J

REV 2 3 FWD

4

Press the STOP 9 button to select AUTO CH. PRO- GRAMMING, then press the FF :/OK button. AUTO CH. SET PROCEEDING PLEASE WAIT and a scale that shows the progress of channel setup will appear on screen. The VCR will memorize all the channels you receive.

5

Wait for a few minutes while the VCR sets up channels. When programming is complete, AUTO CH. SET COMPLETED will appear on screen. Then, the programming of the lowest chan- nel number placed in the VCR’s memory will appear on screen. Now when you press the CH(annel) 8/9 buttons, you will scan only through channels you receive.

Helpful Hints

•If the channel you select has no broadcast, the screen will be solid blue.

•The two Line Input modes will always be stored in the VCR’s mem- ory at channel 00. To select A/V IN FRONT or A/V IN REAR, press 0,0, then press the CH(annel) 8/9 but- tons so that A/V IN FRONT or A/V IN REAR appears briefly on screen. To exit Line Input mode, use the CH(annel) 8/9 buttons to select a channel other than 00.