36 Timer Recording With the VCR Plus+ Programming System (cont’d)
The VCR must be off for a timer
recording to take place!
Make sure a tape is in the VCR.
9
Press the POWER button to turn off the VCR. The VCR
must be turned off for a timer recording to take place.
The rlight will appear on the display panel. The rlight and the
Cassette-Inside light will flash when you turn off the VCR if there
is not a tape in the VCR.
7
Press the SPEED button to select the tape speed. The
selected tape speed, SP or SLP, will appear beside REC SPEED.
8
Press the EXIT/STATUS button. PROGRAM WAS COM-
PLETED/PLEASE TURN OFF VCR FOR TIMER RECORDING
should appear on the screen. (If PROGRAM NOT COMPLETED
appears, begin again from step 1.) After five seconds, the on-
screen display will disappear.
• Do not select DAILY at step 6 if the
VCR Plus+ recording you chose is on
a Saturday or Sunday. The recording
will not occur, even though the VCR
may accept the way you pro-
grammed the recording.
• To exit the VCR Plus+ programming
system at any step, press the
EXIT/STATUS button.
• PROGRAM NOT COMPLETED/
CLASH may appear on-screen for
five seconds at step 8 if the timer
recording you programmed overlaps
with another timer recording. To
cancel the overlapping timer record-
ing, follow the steps on page 40.
Helpful Hints
6
•If you want to record the program one time only, go to
step 7. You may also press the Number 8/DAILY or 9/WEEK-
LY button repeatedly to select a ONE TIME PROGRAM.
•If you want to record the program daily, press the
Number 8/DAILY button. The VCR will record a program
every day from Monday through Friday, starting at the same
time and recording for the same length of time.
•If you want to record the program every week, press
the Number 9/WEEKLY button. The VCR will record a
program on the same day, at the same time, for the same length
of time every week.
5
Press the FF :/OK button. If the VCR PLUS+ and CABLE/TV
channel lists appear on screen, the CABLE/TV channel has not
been set for the VCR PLUS+ channel of the program you have set
in step 4. Complete steps 6 - 7 on page 34.
DAILY PROGRAM (MON-FRI)
PROGRAM 1
CHANNEL +/– 12
START +/– 08:00 PM
STOP +/– 10:00 PM
REC SPEED SP
DATE +/– 07/31/98
FRIDAY
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
–
+
J
........
–
+
........
1
4
7
SPEED
CBL/DBS TV VCR
MENU
EXIT/STATUS
TIMER
SKIP
JOG/SHTL
STILL/SLOW
–
STOP L
PLAY :
+
3 FWD REV 2
c
c
EJECT
POWER
2
5
8
0
QUICK PROGRAMMING
3
6
9
START
DBS
STOP
DAILY
DATE
WEEKLY
CLEAR
CHVOL
REW FF
/OK
VCR/TV
7;;INDEX ::7
AUDIO/MUTE
::;;
REC /OTR
8
6
5
7
9
VRZ364/VRZ344 4/7/99 8:10 PM Page 36