Video Loss Detection

You can set the alarm to be generated on a camera disconnection, which causes a video loss.

Using the mouse may help make setup easier.

1.

Use the up/down buttons (

) in <Event> window to

 

Video Loss Detection

 

 

 

 

 

move to <Video Loss Detection>, and press [ENTER]

 

 

 

 

 

 

 

 

 

 

CH

Video Loss State

 

 

Alarm

Alarm Duration

 

 

button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

OFF

 

None

10 sec

 

 

A window of video loss detection area setup appears.

3

OFF

 

None

10 sec

 

 

 

 

 

 

2

OFF

 

None

10 sec

 

2.

Use direction buttons (

) to move to a desired

 

 

 

 

 

 

 

 

4

OFF

 

None

10 sec

 

 

 

 

 

 

 

 

 

 

item, and set the value.

 

 

 

 

 

 

 

 

 

 

 

Video Loss State : Sets whether to activate video loss detection.

Alarm : Sets the alarm output method.

OK Cancel

For further information on alarm output, refer to “HDD Alarm > Alarm”. (Page 45)

Alarm Duration : Sets the duration of alarm signal and alarm sound.

3.When the video loss detection setup is done, press <OK>.

Alarm Schedule

You can set the conditions and operating hours for scheduled alarms.

Using the mouse may help make setup easier.

USING THE DVR

1. Use the up/down buttons ( ) in <Event> window to move to <Alarm Schedule>, and press [ENTER] button.

2.A window of <Alarm Schedule> settings appears.

3.Alarm : Sets the alarm output method.

For further information on alarm output, refer to “HDD Alarm > Alarm”. (Page 45)

<ON> : Marked in orange, and always generates alarm on scheduled time.

<OFF> : Marked in white, no alarm is generated even if an event occurs.

Event Sync : Marked in Blue, generates alarm only when an event occurs.

Apply to All Alarm : Applies the configured schedule to all alarms.

MWhen the alarm is generated on the scheduled time, you can stop the alarm by canceling the schedule.

4.When the Alarm Schedule setup is done, press <OK>.

Alarm Schedule

 

 

 

 

 

Alarm1

 

 

 

 

 

 

 

 

 

 

 

 

All

0

1

2

3

4

5

6

7

8

9

10

11 12 13 14 15 16 17 18 19 20 21 22 23

Sun

 

 

 

 

 

 

 

 

 

 

 

 

Mon

 

 

 

 

 

 

 

 

 

 

 

 

Tue

 

 

 

 

 

 

 

 

 

 

 

 

Wed

 

 

 

 

 

 

 

 

 

 

 

 

Thu

 

 

 

 

 

 

 

 

 

 

 

 

Fri

 

 

 

 

 

 

 

 

 

 

 

 

Sat

 

 

 

 

 

 

 

 

 

 

 

 

Hol

 

 

 

 

 

 

 

 

 

 

 

 

OFF

 

 

ON

 

 

 

Event Sync

 

 

Apply to All Alarm

 

 

 

 

 

 

 

 

 

OK

 

Cancel

Alarm Schedule

Alarm1

All

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

Sun

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Mon

 

Apply to All Alarm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tue

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Wed

 

 

Apply the alarm scheduling to all?

 

 

 

Thu

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fri

 

 

 

 

 

 

 

 

OK

 

 

 

Cancel

 

 

 

Sat

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hol

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OFF

 

 

ON

 

 

 

Event Sync

 

 

 

 

 

 

 

 

Apply to All Alarm

OK Cancel

English _55

Page 55
Image 55
Samsung SRD470D500 user manual Alarm Schedule, Move to Video Loss Detection, and press Enter