
using the DVR
•IP, Gateway, Subnet Mask, and DNS
-For <Static IP> : You can directly input IP address, Gateway, Subnet Mask and DNS.
-For <Dynamic IP> : IP address, Gateway, and Subnet Mask are set automatically.
-For <ADSL> : IP address, Gateway, and Subnet Mask are set automatically.
•User ID, Password : In case you selected ADSL, provide the “User ID” and its “Password”.
Connection Mode |
|
| |
Connection | Protocol |
|
|
Connection Mode | ADSL |
|
|
Bandwidth | 600kbps |
|
|
IP | 192.168. 1.200 |
| |
Gateway | 192.168. 1. | 1 |
|
Subnet Mask | 255.255.255. 0 |
| |
DNS | Manual | 168.126. 63. | 1 |
User ID | ID |
|
|
Password | ************ |
|
|
| OK | Cancel |
|
M DNS server for <Dynamic IP> and <ADSL> can be set by user only if you selected <Manual>.
6.When the connection setup is done, press <OK>.
Setting the Protocol
1. | Use the up/down buttons ( | ) in <Network> window to |
| move to <Connection Mode>, and press [ENTER] | |
2. | button. |
|
Select <Protocol>. |
| |
3. | Use direction buttons ( | ) to move to a desired |
| item, and set the value. |
|
•Protocol Type : Select the protocol type between TCP and UDP.
If selected UDP, selections of Port (TCP), Port (UDP), and Unicast/ Multicast are activated.
Connection Mode |
|
|
| |
Connection | Protocol |
|
| |
Protocol Type | TCP |
|
|
|
Port(TCP) | 554 |
| ~ | 558 |
Port(UDP) | 8000 ~ 8160 |
|
| |
Unicast/Multicast | Unicast |
|
|
|
Multicast IP | 224.126. | 63. | 1 |
|
TTL | 5 |
|
|
|
Webviewer Port | 80 |
|
|
|
|
| OK |
| Cancel |
If setting the connection mode to ADSL, you cannot select UDP for the protocol type.
•Port (TCP) : Initially, <554~558> is set. It increases / decreases by 5.
- TCP: It has better stability and lower speed when compared to UDP, and recommended for internet environments.
•Port (UDP) : Initially, <8000~8160> is set. It increases / decreases by 160.
- UDP : It has less stability and faster speed when compared to TCP, and recommended for local area network (LAN) environments.
•Unicast/Multicast : Select one between Unicast and Multicast. If selected Multicast, Multicast IP and TTL are activated.
- Unicast : Transfers data (UDP, TCP) individually to each connecting client.
- Multicast : Multiple client can receive the data (only in UDP) without putting additional traffic load to the network.
•Multicast IP : User can directly input.
•TTL : Select from 0 ~ 255. Initial value for the TTL is set to <5>.
•Webviewer Port : Enter the port number for the Web Viewer. Initially, it is set to <80>.
4.When the protocol setup is done, press <OK>.