Detail Settings

Administration Tools Settings Page

Miscellaneous

"View Current Settings"

Displays a list of current settings.

"Reboot"

Reboots the VB101.

"Restore Settings"

All but the Basic Settings, System settings and Network settings will be restored to the factory default settings. Click "Restore"-"OK" button and the VB101 will be rebooted automatically.

On-board File System Information

The On-board File System displays the used space, free space and capacity (used space + free space) in bytes.

Slot A/B

If a PC card, used for communications and storage, is inserted into the slot, the "Manufacturer" and "Product Information" is displayed. Depending on the card type and its status, the operation buttons are displayed and the card status can be controlled. The card slots are labelled A and B from the bottom upwards.

Recorded Picture Information and Manipulation

This section displays the number of recorded pictures and the status of recorded picture processing. The maximum number of pictures that can be recorded is 10000. Under certain circumstances, the "Rebuild" button for "Rebuilding of recorded picture list" and the "Delete" button for "Deletion of recorded pictures" may be displayed, and if the pictures cannot be recorded the reason will be displayed.

"Rebuilding of recorded picture list" Normally, there is no need to reconstruct the picture list. Click "Rebuild" button if you have removed a memory card and modified the content of that memory card (erased files, etc.) on another PC.

"Deletion of recorded pictures"

Deletes pictures recorded on a card. Specify the Delete criteria below and then click the "Delete" button.

"Time"

Select the period of time following the recording of the pictures after which the pictures are deleted.

"Event"

Select whether the pictures to be deleted are those where recording was performed in response to inputs from an external device or according to a schedule. You can also select a combination of the two.

"Camera"

Select camera by which the pictures were recorded.

3

Setup Procedures

e

We recommend that you make a note of current server settings before you

Tip

restore the default settings in "Restore Settings" (P.160).

 

 

Click the [Cancel] button to exit from this page. This returns you to the

settings title page.

59

Page 59
Image 59
Canon VB101 appendix Administration Tools Settings, Restore the default settings in Restore Settings → P.160