The items below are valid when "Use PPP" and "Primarily Call (PPP)" are selected.
"Dial Method"
Select the type of line to be used when Primarily Call(PPP) is selected.
"Phone Number"
Set the phone number to be dialed when Primarily Call(PPP) is selected.
"User Name"
Enter the user name to be used when Primarily Call (PPP) is selected.
"Password"
Enter the password to be used when Primarily Call (PPP) is selected.
"Confirm Password"
Detail Settings
PPP
"Use PPP"
Tick this option to allow PPP connections using a modem cards.
"Receive and Call"
If Receive only (PPP) is selected, PPP connection will be established by incoming call, and if Primarily Call (PPP) is selected, PPP connection will be established by outgoing call.
"Country Selector"
When the global modem is used, select the country where the VB101 will be used.This setting is ignored if the global modem is not used.
"Modem max speed"
Select the maximum baud rate as the limit on the Modem speed. The available settings are 4800, 9600, 19200, 38400, 57600 and 115,200. Normally, there is no need to change this setting. Set a low speed when the line condition is poor.
"PPP Local Address" |
| 3 | |
Sets the local address. For PPP |
| ||
connections, this address is set for the |
| ||
VB101 side. |
|
| Setup |
"PPP Remote Address" |
| ||
|
| ||
Sets the remote address. For PPP | Procedures | ||
accounts with | combinations | of a name | |
connections, this address is set for the |
| ||
Viewer PC or router side. |
|
| |
"PPP Account List" |
|
| |
PPP connection is only permitted to |
| ||
and a password that match those included |
| ||
in this list. (Passwords are not displayed in |
| ||
the list.) If you select an account and click |
| ||
the "Delete" button, the combination of a |
| ||
account name and a password is removed |
| ||
from the list. Up to 10 accounts can be |
| ||
registered on the list. |
|
| |
"Add PPP Account" |
|
| |
Use this to add account and password |
| ||
combinations to the PPP account list. |
| ||
Enter the account name and password, |
| ||
and click the "Add" button. The account |
| ||
name can be up to 15 characters including |
| ||
alphanumeric | characters, underscores |
| |
and hyphens. Passwords can consist of up |
| ||
to 15 ASCII text characters | (space or |
| |
printable characters). |
|
|
●If you are using PPP, take care when entering the phone number. Also, when c Primarily Call(PPP) is selected, the VB101 will continue calling to the
Note | specified phone number. Be mindful of phone charges that apply when using |
| Primarily Call(PPP). |
●If you have selected Primarily Call(PPP), appropriate settings must also be made on the receiving PC.
41