Log Messages
●P003 Memory card error (warning)
Message | AUTOMNT: cannot mount %1 on %2 |
|
|
%1 | Device name |
|
|
%2 | Mount point |
|
|
Explanation | Mount processing was cancelled due to a memory card error. |
|
|
Response | Replace the memory card. |
|
|
●P004 Device busy (err) | |
|
|
Message | AUTOMNT: %1: device is busy |
|
|
%1 | Device name |
|
|
Explanation | The card was unmounted during file access. This does not occur during normal operation. |
|
|
Response | If this occurred when administration tools were used to unmount the card, reboot. |
|
|
●P005 Card initialization failed in card slot A (warning)
Message | ENABLER:slota enable err |
|
|
Explanation | Card information read from the card inserted in card slot A failed. |
|
|
Response | |
|
|
●P006 Card initialization failed in card slot B (warning)
Message | ENABLER:slotb enable err |
|
|
Explanation | Card information read from the card inserted in slot B failed. |
|
|
Response | |
|
|
●P009 Memory card read error (err)
Message | PCMCIA ATA Card(Slot%1 sector %2): Read Sector Error |
|
|
%1 | Slot (AB) |
|
|
%2 | Sector number |
|
|
Explanation | A sector read error occurred. The card may be damaged. |
|
|
Response | Check the memory card and, if necessary, reformat the card. |
| If there is a physical fault on the card, replace the card. |
|
|
●P010 Memory card write error (err)
Message | PCMCIA ATA Card(Slot%1 sector %2): Write Sector Error |
|
|
%1 | Slot (AB) |
|
|
%2 | Sector number |
|
|
Explanation | A sector write error occurred. The card may be damaged. |
|
|
Response | Check the memory card and, if necessary, reformat the card. |
| If there is a physical fault on the card, replace the card. |
|
|
7
Troubleshooting