Canon VB101 Sample application in combination with a lighting unit, 120, Connector Attached Cable

Using the Still Picture Recording Function with a Predetermined Schedule

By using the "Schedule 1-4" setting, you can construct a monitoring system that records pictures according to a predetermined schedule. The still pictures captured in this way are recorded on a flash memory card inserted into the VB101.

Sample application in combination with a lighting unit

This is a monitoring system of the type used in art galleries and similar facilities in which the exhibits are monitored in the hours they are unattended. The light switches on and still pictures are captured at 10-minute intervals by a VC-C4R camera mounted on the ceiling. The equipment shown in the figure below is connected to the terminals on the rear of the VB101 at installation.

Installation Example

	Power
Cameracontroland videoimages	supply
	ON/OFF	Lightingunit
VC-C4R	unit

Lighting unit

In accordance with the predetermined schedule, Out1 is controlled from Out1 to switch on the lighting unit and pictures are captured and recorded by the camera.

Ethernet

VB101

Camera

VB101 Connection Example

RS-232C

cable

Video cable

(RCA)

			Slot-B
			Slot-A	RS232C			Video In
Dc In			CC1	CC2	V1	V2	V3	V4
1	2	1	2
	In	Out	Ethernet
			100/10BT

Connector	Attached Cable
Out1	Lighting unit via the power supply unit
V1	Video cable for the VC-C4R camera
CC1	Control cable for the VC-C4R camera

	LAN	c
	cable
		Note
External Ethernet
device
output

●Do not directly connect the power cord for the lighting unit to OUT1 or OUT2.

●Please confirm the Date and Time settings on page 39.

120