Log Messages
●S007 IP address conflict detected during operation (err)
Message | Duplicate IP address %1 |
|
|
%1 | Ethernet address |
|
|
Explanation | An IP address conflict was detected during operation. This occurs when a network device |
| with the same IP address as the VB101 is started up after the VB101 was started up. |
|
|
Response | As for S006. |
|
|
●S010 FAT (File Allocation Table) count error (err)
Message | only 2 FATs are supported (FATs=%1) |
|
|
%1 | Number of FATs |
|
|
Explanation | The number of FATs is not 2. |
| The file system may be corrupted or it may not be formatted as a FAT file system. |
|
|
Response | If this error affects the internal file system, contact an authorized Canon service representative. If it affects a memory card, replace the memory card. |
|
|
●S011 Cluster size error (err)
Message | cluster size is zero |
|
|
Explanation | The size of clusters is zero. |
| The file system may be corrupted or it may not be formatted as a FAT file system. |
|
|
Response | If this error affects the internal file system, contact an authorized Canon service representative. If it affects a memory card, replace the memory card. |
|
|
●S012 Sector size error (err) | |
|
|
Message | logical sector size is zero |
|
|
Explanation | The sector size is zero. |
| The file system may be corrupted or it may not be formatted as a FAT file system. |
|
|
Response | If this error affects the internal file system, contact an authorized Canon service representative. If it affects a memory card, replace the memory card. |
|
|
●S013 FAT entry count error (err)
Message | file system has %1 clusters, but only space for %2 FAT clusters |
|
|
%1 | Number of clusters |
|
|
%2 | Number of FAT entries |
|
|
Explanation | The FAT entry recording area for the number of clusters is not allocated. |
| The file system may be corrupted or it may not be formatted as a FAT file system. |
|
|
Response | If this error affects the internal file system, contact an authorized Canon service representative. If it affects a memory card, replace the memory card. |
|
|
●S014 Root directory size error (err)
Message | root directory size is zero |
|
|
Explanation | The root directory size is zero. |
| The file system may be corrupted or it may not be formatted as a FAT file system. |
|
|
Response | If this error affects the internal file system, contact an authorized Canon service representative. If it affects a memory card, replace the memory card. |
|
|
7
Troubleshooting