Detail Settings
Basic Settings Settings Page
This page contains indispensable settings taken from the various settings pages for the VB101. If values are specified for these settings on other pages, the most recent change is valid.
Ethernet
The same settings can be specified on the Network settings page.
"Use Ethernet"
Tick this checkbox to use Ethernet.
"Address Settting Method"
If you select "Auto Setting (Bootp)", the IP address is automatically acquired by the Bootp server after restart. If you select "Manual Setting", enter the IP address and subnet mask also.
"IP Address"
Enter a network
"Subnet Mask"
Enter the subnet mask specified for the network to be connected.
"Default Gateway Address"
Specify this setting when you are connecting to a wide area network such as the Internet.
If you selected "Auto Setting (Bootp)" as the address setting method, check that the Bootp server has been started up.
Contact the network administrator for the IP address, subnet mask, and default gateway address settings.
Administration Account
The same settings can be specified on the System settings page.
"Administrator ID"
Sets the ID used by the administrator. Up to 15 characters can be set consisting of alphanumeric characters, underscores and hyphens. The default setting is "root".
"Password"
Sets the password. Up to 15 ASCII characters can be used (space or printable characters). The default setting is "VB101".
"Confirm Password"
Confirms the password in the field above.
Target Application
Chooses " Webview Livescope" or "VIEW- Windows 1.21" as the application used by the VB101.
Click the [OK] button to change the settings. To discard the changes, click the
[Cancel] button. This returns you to the title page.
38
