Log Messages
●A007 View restriction setting error (warning)
Message | inconsistent view restriction for camera[%1] |
|
|
%1 | Camera number |
|
|
Explanation | The view restrictions settings are corrupted. |
| The camera control functions on the affected camera cannot be used. |
|
|
Response | Restore the factory default settings or reset the view restrictions. |
|
|
●A008 Compatibility error in the view restrictions settings (warning)
Message | unacceptable view restriction for camera[%1] |
|
|
%1 | Camera number |
|
|
Explanation | Even in the telephoto field of view, the view restriction settings cannot be satisfied in the horizontal or vertical direction. When this occurs, |
| the zoom setting is fixed at the telephoto field of view, and camera head control is prohibited in directions that do not satisfy the permitted field of view restrictions. |
|
|
Response | Set appropriate values for the view restrictions. |
|
|
●A010 Camera control driver start and stop (info)
Message | %1 driver for camera[%2] %3 |
|
|
%1 | Camera type (Canon |
|
|
%2 | Camera number |
|
|
%3 | startedstopped |
|
|
Explanation | The camera control device was detected and the driver started up, |
| or a camera control device error was detected and the driver stopped. |
|
|
●A011 Camera control device error (warning)
Message | %1[%2] malfunction (%3) |
|
|
%1 | Camera type |
|
|
%2 | Camera number |
|
|
%3 | Error (readwritetimeout...) |
|
|
Explanation | Camera control device I/O error. |
|
|
Response | There is a malfunction if it does not reset automatically. Contact an authorized |
| Canon service representative. |
|
|
●A014 Access prohibited due to host restriction (notice) | |
|
|
Message | %1@%2 access denied |
|
|
%1 | Client type (LS) |
|
|
%2 | Client host IP address |
|
|
Explanation | Access from the client was denied due to host restrictions . (LS indicates a WebView client. |
| Normally, the same message is displayed several times.) |
|
|
7
Troubleshooting
